REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type LH Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE REAR SEAT ASSEMBLY LH


    1. Remove the rear seat assembly LH Click here.

  2. REMOVE REAR SEAT UPPER RECLINING COVER LH

    A0099V5E01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 3 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    A009AHO

    1. Remove the 3 screws and handle.

  4. REMOVE CENTER SEAT HINGE COVER LH

    A0099E9

    1. Using a clip remover, remove the clip.

    2. Detach the 2 guides and remove the cover.

  5. REMOVE REAR SEAT CUSHION MOULDING LH

    A0097OT

    1. Using a clip remover, detach the clip.

    2. Using a moulding remover, detach the 3 claws.

    3. Move the moulding in the direction of the arrow to detach the guide and remove the moulding.

  6. REMOVE REAR SEATBACK LOCK STRIKER COVER LH

    A0097MS

    1. Using a clip remover, detach the 3 clips and remove the cover.

  7. REMOVE SEAT CUSHION COVER WITH PAD


    1. A00979X

      Detach the hooks.

    2. A0098GM

      Detach the hook and remove the seat cushion cover with pad.

  8. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    A0094ZX

    1. Remove the bolt and inner belt and disconnect the 3 point type belt anchor.