REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type LH Side) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    A00JV8OE01
    Text in Illustration
    *a Protruding Part

    1. Install the inner belt and connect the 3 point type belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

  2. INSTALL SEAT CUSHION COVER WITH PAD


    1. A00JVSR

      Attach the hook.

    2. A00K1AD

      Attach the hooks to install the seat cushion cover with pad.

  3. INSTALL REAR SEATBACK LOCK STRIKER COVER LH


    1. Attach the 3 clips to install the cover.

  4. INSTALL REAR SEAT CUSHION MOULDING LH

    A00JYK1

    1. Move the moulding in the direction of the arrow to attach the guide.

    2. Attach the 3 claws and clip to install the moulding.

  5. INSTALL CENTER SEAT HINGE COVER LH

    A00JZQ5

    1. Attach the 2 guides and install the cover with the clip.

  6. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH


    1. Install the handle with the 3 screws.

  7. INSTALL REAR SEAT UPPER RECLINING COVER LH

    A00JV77

    1. Attach the 3 claws to install the cover.

  8. INSTALL REAR SEAT ASSEMBLY LH


    1. Install the rear seat assembly LH Click here.