SEAT HEATER SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

    A00940P

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the integration control and panel assembly.

  2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    A00OBDVE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the No. 2 instrument panel finish panel cushion.

    2. Using a moulding remover, detach the 5 clips and remove the No. 2 instrument panel finish panel cushion.

  3. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    A00O9Z2

    1. Detach the 4 clips and remove the instrument panel finish panel end.

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A00OAX0

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the instrument panel finish panel end.

  6. REMOVE FRONT CONSOLE UPPER PANEL GARNISH

    A00O85FE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the front console upper panel garnish.

    2. Detach the 5 clips.

    3. Disconnect each connector and remove the front console upper panel garnish.

  7. REMOVE SEAT HEATER SWITCH (for Manual Transmission)


    1. A00989C

      Detach the 4 claws and remove the 2 switches.

  8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)

    A00O75AE01
    Text in Illustration
    *1 Shifting Hole Cover

    1. Move the shifting hole cover downward.

    2. Twist the shift lever knob in the direction indicated by the arrow and remove it.

  9. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission)

    A00O6GME01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the console panel.

    2. Using a moulding remover, detach the 8 clips and 2 claws.

    3. Disconnect each connector and remove the console panel.

  10. REMOVE SEAT HEATER SWITCH (for Automatic Transmission)


    1. A009BCV

      Disconnect the 2 connectors.

    2. A00947L

      Detach the 4 claws and remove the 2 switches.