LUMBAR SWITCH (for Manual Seat) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL LUMBAR SWITCH ASSEMBLY


    1. Install the switch with the 2 screws.

  2. INSTALL FRONT SEAT CUSHION SHIELD LH


    1. for Driver Side:

      Attach the 5 wire harness clamps and connect the 2 connectors.

    2. A00XI32

      Attach the 4 claws and clip to install the cushion shield.

    3. Install the screw.

  3. INSTALL VERTICAL ADJUSTING HANDLE LH


    1. Install the handle with the screw.

  4. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    A00XHDM

    1. Attach the claw to install the handle.

  5. INSTALL FRONT SEAT ASSEMBLY


    1. Install the front seat assembly Click here.