LUMBAR SWITCH (for Manual Seat) INSPECTION
-
INSPECT LUMBAR SWITCH ASSEMBLY (for LHD)
Text in Illustration *1 Hold Switch *2 Release Switch *a Component without harness connected
(Lumbar Switch)
-
Measure the resistance according to the value(s) in the table below.
Standard Resistance Tester Connection Switch Condition Specified Condition 3 (B) - 4 (H) Hold Below 1 Ω 1 (R) - 2 (E2) 1 (R) - 2 (E2) Off 4 (H) - 5 (E1) 1 (R) - 3 (B) Release 4 (H) - 5 (E1) If the result is not as specified, replace the lumbar switch.
-
-
INSPECT LUMBAR SWITCH ASSEMBLY (for RHD)
Text in Illustration *1 Hold Switch *2 Release Switch *a Component without harness connected
(Lumbar Switch)
-
Measure the resistance according to the value(s) in the table below.
Standard Resistance Tester Connection Switch Condition Specified Condition 3 (B) - 4 (H) Hold Below 1 Ω 1 (R) - 2 (E2) 1 (R) - 2 (E2) Off 4 (H) - 5 (E1) 1 (R) - 3 (B) Release 4 (H) - 5 (E1) If the result is not as specified, replace the lumbar switch.
-