POWER SEAT SWITCH (for Rear No. 2 Seat) REMOVAL

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE SWITCH BEZEL


    1. A009BI3E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the switch bezel.

    2. Using a moulding remover, detach the 2 claws.

    3. A0097DU

      Disconnect the connector and remove the switch bezel.

  2. REMOVE REAR POWER SEAT SWITCH


    1. A009AIP

      Detach the 2 claws and remove the switch from the switch bezel.

  3. REMOVE NO. 1 FOLD SEAT SWITCH ASSEMBLY


    1. A00990V
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the No. 1 fold seat switch assembly.

    2. Using a moulding remover, detach the 2 claws.

    3. A0096D5

      Disconnect the 2 connectors and remove the fold seat switch.

  4. REMOVE REAR POWER SEAT SWITCH


    1. A009AMX

      Detach the 2 claws and remove the switch from the fold seat switch.