REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL REAR SEAT ASSEMBLY RH

    A00986GE01

    1. Place the seat in the cabin.

      Note

      Be careful not to damage the vehicle body.

      Tech Tips

      Be sure to install the seat with the seatback folded down.

    2. Connect the center inner belt to the seat.

    3. Temporarily install the seat with the 5 bolts and nut.

    4. Tighten the bolts and nut in the order indicated in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  2. INSTALL SEAT TRACK COVER RH


    1. Attach the 5 clips and claw to install the cover.

  3. INSTALL SEAT TRACK INNER BRACKET COVER RH


    1. Attach the 8 clips to install the cover.

  4. INSTALL REAR SEAT TRACK OUTER BRACKET COVER

    A0099RH

    1. Move the cover in the direction of the arrow to attach the 2 guides.

    2. Attach the 2 claws to install the cover.

  5. INSTALL REAR SEAT TRACK INNER BRACKET COVER

    A0095GU

    1. Attach the 2 claws and guide to install the cover.

  6. INSTALL REAR SEAT HEADREST ASSEMBLY


    1. Install the headrest.