REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side) DISASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE REAR SEAT UPPER RECLINING COVER RH

    A0099T9E01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 3 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

    A00969Z

    1. Remove the 3 screws and handle.

  3. REMOVE REAR SEAT CUSHION MOULDING RH

    A00970B

    1. Using a clip remover, detach the clip.

    2. Using a moulding remover, detach the 3 claws.

    3. Move the moulding in the direction of the arrow to detach the guide and remove the moulding.

  4. REMOVE REAR SEAT REAR CUSHION MOULDING LH

    A009C0Y

    1. Remove the screw.

    2. Using a moulding remover, detach the 3 claws.

    3. Detach the 2 guides and remove the moulding.

  5. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

    A00984ZE01

    1. Remove the bolt and inner belt.

  6. REMOVE REAR SEAT INNER BELT ASSEMBLY

    A0098HH

    1. Remove the nut and inner belt.

  7. REMOVE REAR SEATBACK LOCK STRIKER COVER RH

    A0094MY

    1. Using a clip remover, detach the 3 clips and remove the cover.

  8. REMOVE SEAT CUSHION COVER WITH PAD


    1. A0094B3

      Detach the hooks and remove the seat cushion cover with pad.

  9. REMOVE REAR NO. 2 SEAT PROTECTOR

    A00972Y

    1. Remove the 2 protectors from the cushion pad.

  10. REMOVE REAR SEAT CUSHION EDGE PROTECTOR


    1. Remove the protector from the cushion spring.

  11. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

    A00944I

    1. Remove the hog rings and seat cushion cover from the seat cushion pad.

  12. REMOVE RECLINING ADJUSTER KNOB CAP RH


    1. A009B0UE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the claw and guide, and then remove the cap.

      Tech Tips

      Tape the screwdriver tip before use.

  13. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH


    1. A009595

      Remove the 2 screws.

    2. A0098Z8E02

      Disconnect the cable in the order shown in the illustration and remove the lever.

  14. REMOVE REAR SEAT COVER CAP

    A00960U

    1. Using a screwdriver, detach the claw and guide, and then remove the cover cap.

      Tech Tips

      Tape the screwdriver tip before use.

  15. REMOVE REAR CENTER BACK LOCK CONTROL LEVER

    A0096TV

    1. Remove the 2 screws.

    2. Move the lever in the direction of the arrow to detach the guide and remove the lever.

    3. Detach the cable clamp and disconnect the cable from the lever.

  16. REMOVE REAR SEATBACK COVER

    A0098Q3

    1. Using a screwdriver, detach the 4 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  17. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH

    A009BLS

    1. Using a clip remover, detach the 7 clips and remove the carpet.

  18. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    A0096D1

    1. Detach the 4 claws and remove the 2 supports.

  19. REMOVE SEATBACK COVER WITH PAD

    A0099YXE01
    Text in Illustration
    *1 Hook
    *2 Hog Ring

    1. Remove the hog rings and detach the hooks, and then remove the seatback cover with pad.

  20. REMOVE SEPARATE TYPE REAR SEATBACK COVER

    A0098P1

    1. Remove the hog rings and cover from the seatback pad.

  21. REMOVE REAR SEATBACK EDGE PROTECTOR


    1. Remove the protector from the seatback frame.

  22. REMOVE REAR SEAT INNER RECLINING COVER RH

    A0099U9

    1. Remove the 2 screws.

    2. Detach the guide and remove the cover.

  23. REMOVE RECLINING ADJUSTER INSIDE COVER RH

    A0095HH

    1. Remove the 2 screws.

    2. Detach the 2 claws and remove the cover.

  24. REMOVE RECLINING ADJUSTER INSIDE COVER RH

    A0098XH

    1. Using a clip remover, detach the clip.

    2. Move the cover in the direction of the arrow to detach the 2 claws and remove the cover.

  25. REMOVE RECLINING ADJUSTER INSIDE COVER RH

    A0098L6

    1. Detach the claw and guide, and remove the cover.

  26. REMOVE REAR SEAT CUSHION SPRING DAMPER

    A009A2Z

    1. Remove the 2 nuts and damper.

  27. REMOVE REAR SEAT RECLINING CONTROL CABLE


    1. Cut off the 3 cable ties.

      A009BR5

    2. Detach the 2 cable clamps and disconnect the cable, and then remove the cable.

      A00948D

  28. REMOVE REAR NO. 2 SEAT RECLINING CONTROL CABLE


    1. Detach the cable clamp and disconnect the cable, and then remove the cable.

      A009BFL

  29. REMOVE REAR SEAT CUSHION SET PLATE

    A0093WP

    1. Remove the 2 nuts and set plate.

  30. REMOVE REAR SEATBACK LOCK PLATE LH


    1. Detach the 2 cable clamps and disconnect the cable.

    2. Remove the nut and lock plate.

      A0094IF

  31. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH

    A009B5C

    1. Using a T45 "TORX" socket wrench, remove the 4 "TORX" bolts and seatback frame.

  32. REMOVE REAR SEAT COVER

    A0097FX

    1. Remove the screw and cover.

  33. REMOVE REAR SEAT CUSHION SPRING

    A009AOG

    1. Detach the 2 hooks and remove the spring.

  34. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY RH

    A009AXLE01
    Text in Illustration
    *1 Seat Leg Plate

    1. Remove the 6 nuts and seat cushion frame together with the seat leg plate.

  35. REMOVE REAR SEAT TRACK ADJUSTING HANDLE RH


    1. A0098JZ

      Remove the seat cushion side frame.

    2. A009A7B

      Slide the slide rail to the rearmost position.

    3. Using a small screwdriver, push down the handle stopper to detach the claw and remove the adjusting handle.

      Tech Tips

      Insert the screwdriver in the hole shown into the illustration while looking into the hole.