REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. Remove the headrest.

  2. REMOVE REAR SEAT TRACK INNER BRACKET COVER

    A009C4D

    1. Using a moulding remover, detach the 2 claws and guide, and then remove the cover.

  3. REMOVE REAR SEAT TRACK OUTER BRACKET COVER

    A0096CV

    1. Using a moulding remover, detach the 2 claws.

    2. Move the cover in the direction of the arrow to detach the 2 guides and remove the cover.

  4. REMOVE SEAT TRACK INNER BRACKET COVER RH

    A0099RG

    1. Using a clip remover, detach the 8 clips and remove the cover.

  5. REMOVE SEAT TRACK COVER RH

    A009905

    1. Using a clip remover, detach the 5 clips and claw, and then remove the cover.

  6. REMOVE REAR SEAT ASSEMBLY RH

    A0094L3

    1. Disconnect the center inner seat belt from the seat.

    2. Remove the 5 bolts and nut.

    3. Remove the rear seat.

      Note

      Be careful not to damage the vehicle body.

      Tech Tips

      Be sure to remove the seat with the seatback folded down.