REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type LH Side) DISASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE REAR SEAT UPPER RECLINING COVER LH

    A0099V5E01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 3 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    A009AHO

    1. Remove the 3 screws and handle.

  3. REMOVE CENTER SEAT HINGE COVER LH

    A0099E9

    1. Using a clip remover, remove the clip.

    2. Detach the 2 guides and remove the cover.

  4. REMOVE REAR SEAT CUSHION MOULDING LH

    A0097OT

    1. Using a clip remover, detach the clip.

    2. Using a moulding remover, detach the 3 claws.

    3. Move the moulding in the direction of the arrow to detach the guide and remove the moulding.

  5. REMOVE REAR SEATBACK LOCK STRIKER COVER LH

    A0097MS

    1. Using a clip remover, detach the 3 clips and remove the cover.

  6. REMOVE SEAT CUSHION COVER WITH PAD


    1. A00979X

      Detach the hooks.

    2. A0098GM

      Detach the hook and remove the seat cushion cover with pad.

  7. REMOVE REAR NO. 2 SEAT PROTECTOR

    A0098LY

    1. Remove the 2 protectors from the cushion pad.

  8. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

    A0097P2

    1. Remove the hog rings and seat cushion cover from the seat cushion pad.

  9. REMOVE REAR SEAT CUSHION EDGE PROTECTOR


    1. Remove the protector from the cushion spring.

  10. REMOVE CENTER SEATBACK ASSEMBLY

    A0095WW

    1. Remove the 2 bolts and center seatback.

  11. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY


    1. Remove the headrest.

  12. REMOVE CENTER SEAT HINGE COVER

    A0098RN

    1. Using a clip remover, remove the clip.

    2. Detach the 2 guides and remove the cover.

  13. REMOVE REAR SEAT RECLINING BRACKET LH

    A009BKI

    1. Using a T45 "TORX" socket wrench, remove the "TORX" bolt, bush and bracket.

  14. REMOVE REAR SEAT RECLINING BRACKET RH


    1. Using a T45 "TORX" socket wrench, remove the "TORX" bolt, bush and bracket.

  15. REMOVE REAR SEATBACK STAY COVER LH

    A009AKD

    1. Using a moulding remover, detach the 3 claws.

    2. Detach the guide and remove the cover.

  16. REMOVE REAR SEATBACK STAY COVER RH


    1. Using a moulding remover, detach the 3 claws.

    2. Detach the guide and remove the cover.

  17. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY


    1. A009BC6

      Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts and 2 bushes.

    2. A009BN0

      Remove the nut and armrest support.

    3. A0099YD

      Remove the armrest as shown in the illustration.

  18. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY


    1. A0096M4

      Remove the 2 screws.

    2. A009BKU

      Using a moulding remover, detach the 2 claws and remove the cup holder.

  19. REMOVE REAR SEATBACK COVER

    A0098Q3

    1. Using a screwdriver, detach the 4 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  20. REMOVE REAR SEATBACK LOCK COVER

    A0098QW

    1. Using a moulding remover, detach the claw.

    2. Move the cover in the direction of the arrow to detach the clip and 2 guides, and then remove the cover.

  21. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY

    A009BMM

    1. Using a clip remover, detach the 5 clips and remove the board.

  22. REMOVE SEAT ARMREST COVER


    1. A0094LK

      Detach the hooks.

    2. A009AZ0

      Remove the cover with pad.

    3. A009AQ6

      Remove the cover from the pad.

  23. REMOVE REAR SEAT HEADREST SUPPORT

    A009BDL

    1. Detach the 4 claws and remove the 2 supports.

  24. REMOVE NO. 1 SEATBACK COVER


    1. A0097HD

      Using a moulding remover, detach the 2 claws.

    2. A0096PT

      Detach the guide and remove the cover.

  25. REMOVE REAR SEAT LOCK ASSEMBLY LH

    A0099ZO

    1. Detach the clamp and disconnect the wire.

    2. Remove the 2 bolts and lock.

  26. REMOVE REAR NO. 1 SEAT LOCK CONTROL LEVER

    A0097GC

    1. Remove the lever as shown in the illustration.

  27. REMOVE FOLD SEATBACK WIRE

    A0094JE

    1. Detach the 2 claws and remove the wire.

  28. REMOVE COAT HOOK CAP

    A009A2RE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and guide, and then remove the cap.

      Tech Tips

      Tape the screwdriver tip before use.

  29. REMOVE CENTER NO. 2 SEATBACK COVER

    A00943I

    1. Remove the 3 screws and cover.

  30. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    A0094ZX

    1. Remove the bolt and inner belt and disconnect the center outer belt.

  31. REMOVE RECLINING ADJUSTER KNOB CAP LH

    A009BFME01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the claw and guide, and then remove the cap.

      Tech Tips

      Tape the screwdriver tip before use.

  32. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


    1. A009806

      Remove the 2 screws.

    2. A009A7NE02

      Disconnect the cable in the order shown in the illustration and remove the lever.

  33. REMOVE SEAT BELT ANCHOR COVER CAP


    1. A009B4EE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and remove the cap.

      Tech Tips

      Tape the screwdriver tip before use.

  34. REMOVE REAR SEAT SHOULDER BELT COVER


    1. Disconnect the outer belt from the cover.

    2. A0098MT

      Detach the 2 claws and 2 guides, and then remove the cover.

  35. REMOVE REAR SEATBACK COVER

    A0098Q3

    1. Using a screwdriver, detach the 4 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  36. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH

    A009BW9

    1. Using a clip remover, detach the 7 clips and remove the carpet.

  37. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    A0096D1

    1. Detach the 4 claws and remove the 2 supports.

  38. REMOVE SEATBACK COVER WITH PAD

    A009B6WE01

    1. Remove the hog rings and detach the hooks, and then remove the seatback cover with pad.

      Text in Illustration
      *1 Hook
      *2 Hog Ring
    2. A0096TH

      Disconnect the outer belt from the seatback cover with pad.

  39. REMOVE SEPARATE TYPE REAR SEATBACK COVER

    A009AP3

    1. Remove the hog rings and cover from the seatback pad.

  40. REMOVE REAR SEATBACK EDGE PROTECTOR


    1. Remove the protector from the seatback frame.

  41. REMOVE REAR SEAT INNER RECLINING COVER LH

    A009450

    1. Remove the 2 screws.

    2. Detach the guide and remove the cover.

  42. REMOVE RECLINING ADJUSTER INSIDE COVER LH

    A009A5R

    1. Remove the 2 screws.

    2. Detach the 2 claws and remove the cover.

  43. REMOVE REAR SEAT REAR CUSHION MOULDING LH

    A0097J0

    1. Using a clip remover, detach the clip.

    2. Using a moulding remover, detach the 4 claws.

    3. Move the moulding in the direction of the arrow to detach the guide and remove the moulding.

  44. REMOVE CAP

    A0099AW

    1. Detach the 2 claws and remove the cap.

  45. REMOVE REAR SEAT RECLINING COVER INNER LH

    A0096BA

    1. Detach the claw and guide, and then remove the cover.

  46. REMOVE REAR SEAT CUSHION SPRING DAMPER

    A0095Z0

    1. Remove the 2 nuts and damper.

  47. REMOVE REAR SEAT SHOULDER BELT GUIDE

    A009569

    1. Detach the claw and guide, and then remove the belt guide.

  48. REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

    A0094VW

    1. Remove the nut and bolt, and then detach the 2 claws and remove the seat belt.

  49. REMOVE REAR SEAT RECLINING CONTROL CABLE


    1. Cut off the 4 cable ties.

      A009BQB

    2. Detach the 3 cable clamps and disconnect the cable, and then remove the cable.

      A00957Z

  50. REMOVE REAR NO. 2 SEAT RECLINING CONTROL CABLE


    1. Detach the 3 cable clamps and disconnect the cable, and then remove the cable.

      A0095RU

  51. REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY LH

    A0099ZS

    1. Remove the 2 nuts and lever.

  52. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY LH

    A009BXH

    1. Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts.

    2. Remove the 2 bolts and seatback frame.

  53. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY LH

    A0095PC

    1. Remove the 6 nuts and seat cushion frame.

  54. REMOVE REAR SEAT TRACK ADJUSTING HANDLE LH

    A009BIL

    1. Slide the slide rail to the rearmost position.

    2. Using a small screwdriver, push down the handle stopper to detach the claw and remove the adjusting handle.

      Tech Tips

      Insert the screwdriver into the hole shown in the illustration while looking into the hole.