REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Tumble Seat Type RH Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. Remove the headrest.

  2. REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER

    A0094GR

    1. Using a moulding remover, detach the 6 claws.

    2. Detach the 2 guides and remove the cover.

  3. REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER

    A0097O1

    1. Using a moulding remover, detach the 6 claws.

    2. Detach the 2 guides and remove the cover.

  4. REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER


    1. A0094K7

      Operate the reclining release handle to move the seat into the position shown in the illustration.

    2. A009BVL

      Using a moulding remover, detach the claw and remove the cover.

  5. REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER


    1. A009BF3

      Using a moulding remover, detach the claw and remove the cover.

  6. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

    A0099J7

    1. Remove the 3 bolts, nut and seat.

      Note

      Be careful not to damage the vehicle body.