REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Tumble Seat Type RH Side) DISASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

    A009560

    1. Remove the 2 screws.

    2. Using a moulding remover, detach the 2 claws.

    3. Move the cover in the direction of the arrow to detach the guide.

    4. A009C58

      Detach the 2 hooks and remove the cover.

  2. REMOVE REAR NO. 1 SEAT RECLINING COVER RH


    1. A00973U

      Remove the 2 screws.

    2. Using a moulding remover, detach the 2 claws.

    3. Move the cover in the direction of the arrow to detach the guide and remove the cover.

  3. REMOVE SEAT TRACK OPEN LEVER PIN SUB-ASSEMBLY

    A009BH8

    1. Using a screwdriver, remove the stopper.

    2. Remove the pin as shown in the illustration.

      Tech Tips

      Use the same procedure for both pins.

  4. REMOVE REAR SEAT HINGE PAWL GUIDE

    A0096V0

    1. Detach the 4 claws and remove the pawl guide.

      Tech Tips

      Use the same procedure for both pawl guides.

  5. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH


    1. A0099F7

      Using a screwdriver, remove the E-ring.

    2. A0099K0

      Remove the pin and hinge.

  6. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH


    1. A0094ZM

      Using a screwdriver, remove the E-ring.

    2. A0094ZG

      Remove the pin.

    3. A0093ZE

      Using a screwdriver, detach the 6 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    4. A00969X

      Remove the 4 screws.

    5. Disconnect the reclining release handle from the under cover.

    6. A0099AV

      Raise the under cover.

    7. Using a screwdriver, remove the spring of the seat stay ball-joint.

    8. Disconnect the seat stay.

    9. Remove the seat hinge and seat stay as a unit.

      Note

      The seat stay cannot be disconnected from the seat hinge. If the stay is disconnected from the hinge, replacement of both parts is necessary.

      Tech Tips

      If it is necessary to replace the seat hinge, replace it together with the seat stay as the stay cannot be disconnected from the hinge.

  7. REMOVE REAR SEAT STAY SUB-ASSEMBLY

    Tech Tips


    • As the seat stay cannot be disconnected from the seat hinge, it is removed in the previous step.

    • If it is necessary to replace the seat stay, replace it together with the seat hinge as the stay cannot be disconnected from the hinge.

  8. REMOVE REAR SEAT CUSHION EDGE PROTECTOR

    A009804

    1. Remove the protector from the cushion frame.

      Tech Tips

      Use the same procedure for both protectors.

  9. REMOVE FOLD SEAT LEG LOCK CUSHION

    A009AR5

    1. Remove the cushion from the protector.

      Tech Tips

      Use the same procedure for both cushions.

  10. REMOVE REAR SEAT CUSHION SUPPORT SPRING

    A0099UL

    1. Remove the spring from the seat cushion frame.

      Tech Tips

      Use the same procedure for both springs.

  11. REMOVE REAR SEAT CUSHION UNDER COVER SUB-ASSEMBLY RH


    1. Remove the under cover.

  12. REMOVE REAR NO. 2 SEAT HINGE COVER LH

    A0096WS

    1. Detach the 3 claws and remove the cover.

  13. REMOVE REAR NO. 2 SEAT HINGE COVER RH


    1. Detach the 3 claws and remove the cover.

  14. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


    1. A009BLQE01

      Remove the nut and inner belt.

  15. REMOVE SEAT CUSHION COVER WITH PAD


    1. A009A5PE01
      Text in Illustration
      *1 Tack Pin

      Cut off the tack pins and remove the carpet from the cushion pad.

    2. A00947Q

      Remove the 3 hog rings and seat cushion cover with pad.

  16. REMOVE REAR SEAT INNER CUSHION EDGE PROTECTOR RH


    1. A009B21E01
      Text in Illustration
      *1 Tack Pin

      Cut off the tack pins and remove the carpet from the cushion pad.

  17. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

    A0099EN

    1. Remove the hog rings and seat cushion cover from the seat cushion pad.

  18. REMOVE REAR SEATBACK COVER

    A0098Q3

    1. Using a screwdriver, detach the 4 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  19. REMOVE NO. 1 SEATBACK PAD RH


    1. A009ACRE01
      Text in Illustration
      *1 Fastening Tape

      Detach the fastening tape and open the cover.

    2. A009AR4

      Remove the 3 hog rings.

    3. A0097BL

      Open the 2 fasteners, and then open the seatback cover.

    4. A0098YA

      Remove the seatback pad.

  20. REMOVE REAR SEATBACK LOCK STRIKER COVER

    A009B0UE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the claw and guide, and then remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  21. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH


    1. A009595

      Remove the 2 screws.

    2. A0098Z8E02

      Disconnect the cable in the order shown in the illustration and remove the lever.

  22. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    A0094N6

    1. Detach the 4 claws and remove the 2 supports.

  23. REMOVE SEATBACK COVER WITH PAD

    A009573

    1. Detach the 2 hooks and remove the seatback cover with pad.

  24. REMOVE SEPARATE TYPE REAR SEATBACK COVER

    A00998WE01
    Text in Illustration
    *1 Fastening Tape

    1. Detach the 2 fastening tapes.

    2. Remove the hog rings and seatback cover from the seatback pad.

  25. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY

    A0098Q7

    1. Detach the 2 cable clamps, and then disconnect the cable and remove it.

  26. REMOVE REAR SEAT INNER RECLINING COVER LH

    A0094OK

    1. Detach the 2 claws and 2 guides, and then remove the cover.

  27. REMOVE REAR SEAT INNER RECLINING COVER RH


    1. Detach the 2 claws and 2 guides, and then remove the cover.

  28. REMOVE REAR SEAT RECLINING COVER INNER LH

    A009C0K

    1. Detach the 2 guides and remove the cover.

  29. REMOVE REAR SEAT RECLINING COVER INNER RH


    1. Detach the 2 guides and remove the cover.

  30. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY RH

    A0098S3

    1. Remove the 4 bolts and seatback frame.

  31. REMOVE NO. 1 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY RH


    1. A009BXE

      Cut off the 2 cable ties.

    2. A0093XF

      Detach the 3 cable clamps, and then disconnect the cable and remove it.