REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side) REASSEMBLY

INSTALL REAR NO. 1 SEAT PROTECTOR RH

1. Attach the claw to install the protector.

INSTALL REAR NO. 1 SEAT PROTECTOR LH

1. Attach the 2 claws to install the protector.

INSTALL REAR SEAT SHOULDER BELT GUIDE

1. Attach the guide and claw to install the belt guide.

INSTALL REAR SEATBACK EDGE PROTECTOR

1. Install the protector to the seatback frame.

INSTALL SEPARATE TYPE REAR SEATBACK COVER RH

Text in Illustration

*1	Hog Ring Pliers

1. Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.

   Note

   
   

   • Be careful not to damage the cover.

   • When installing the hog rings, avoid wrinkling the cover.

INSTALL SEATBACK COVER WITH PAD

Text in Illustration

*1	Hog Ring Pliers
*2	Hook
*3	Hog Ring

1. Connect the outer belt to the seatback cover with pad.

2. Attach the hook.

3. Using hog ring pliers, install the seatback cover with pad with new hog rings.

INSTALL REAR SEAT LOCK STRIKER

1. Using a T45 "TORX" socket wrench, install the striker.

   Torque:

   21 N*m  { 214 kgf*cm, 15 ft.*lbf }

INSTALL REAR SEATBACK LOCK STRIKER PROTECTOR

1. Install the protector to the striker.

INSTALL REAR SEAT SHOULDER BELT COVER

1. Connect the outer belt to the cover.

2. Attach the 3 claws to install the cover.

3. Install the screw.

INSTALL SEAT BELT ANCHOR COVER CAP

1. Attach the 2 guides and 2 claws to install the cap.

INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

1. Attach the 4 claws to install the 2 supports.

INSTALL REAR SEATBACK STOP BUTTON GROMMET

1. Attach the 3 claws to install the grommet.

INSTALL REAR SEATBACK LOCK RELEASE BUTTON

1. Install the release button as shown in the illustration.

   Text in Illustration

   Clockwise

INSTALL REAR SEATBACK LOCK ASSEMBLY RH

1. While moving the release button in the direction of the arrow in the illustration, attach it to the grommet.

2. Install the seatback lock with the 2 bolts.

   Torque:

   21 N*m  { 214 kgf*cm, 15 ft.*lbf }

3. 

   Text in Illustration

   *1	Hog Ring Pliers

   Using hog ring pliers, install 2 new hog rings.

INSTALL REAR SEATBACK LOCK COVER RH

1. Attach the 2 hooks to install the cover.

2. Install the 2 screws.

INSTALL CENTER NO. 2 SEATBACK COVER

1. Attach the 2 claws to install the cover.

2. Install the screw.

INSTALL REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY RH

1. Install the control lever with the 2 screws.

INSTALL REAR SEAT LOCK ASSEMBLY RH

1. Install the lock with the 2 bolts.

   Torque:

   21 N*m  { 214 kgf*cm, 15 ft.*lbf }

2. Attach the clamp to connect the wire.

INSTALL REAR NO. 1 SEAT NO. 2 SIDE PLATE

INSTALL REAR SEAT HEADREST SUPPORT

1. Attach the 4 claws to install the 2 supports.

INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY

1. Attach the 4 claws and 3 clips to install the board.

INSTALL REAR SEATBACK LOCK COVER

1. Move the cover in the direction of the arrow to attach the clip and 2 guides.

2. Attach the claw.

INSTALL REAR SEATBACK COVER

1. Attach the 4 claws to install the cover.

INSTALL NO. 2 CUP HOLDER ASSEMBLY RH

1. Install the 2 cup holders.

INSTALL REAR CENTER SEAT ARMREST ASSEMBLY

1. Install the bush.

2. Using a T45 "TORX" socket wrench, install the armrest and 2 bushes with the 2 "TORX" bolts.

   Torque:

   21 N*m  { 214 kgf*cm, 15 ft.*lbf }

INSTALL REAR SEATBACK STAY COVER RH

1. Attach the 3 claws to install the cover.

2. Using a T45 "TORX" socket wrench, install the bush and hinge with the "TORX" bolt.

   Torque:

   21 N*m  { 214 kgf*cm, 15 ft.*lbf }

INSTALL REAR SEATBACK STAY COVER LH

1. Attach the 3 claws to install the cover.

INSTALL CENTER SEAT HINGE COVER

1. Attach the claw to install the cover.

INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

1. Install the headrest.

INSTALL CENTER SEATBACK ASSEMBLY

1. Temporarily install the center seatback with the 2 bolts, bush and "TORX" bolt.

2. Tighten the 2 bolts.

   Torque:

   21 N*m  { 214 kgf*cm, 15 ft.*lbf }

3. Using a T45 "TORX" socket wrench, tighten the "TORX" bolt.

   Torque:

   21 N*m  { 214 kgf*cm, 15 ft.*lbf }

INSTALL CENTER SEATBACK COVER SUB-ASSEMBLY

1. Attach the 2 guides and install the cover with the screw.

INSTALL REAR SEAT INNER RECLINING COVER RH

1. Attach the 2 guides and install the cover with the screw.

INSTALL NO. 1 SEATBACK BOARD SUB-ASSEMBLY

1. Attach the guide and 3 clips to install the board.

INSTALL REAR SEAT LEG COVER

1. Attach the guide and claw to install the cover.

   Tech Tips

   Use the same procedure for both covers.

INSTALL REAR SEAT LEG BRACKET COVER

1. Attach the 4 claws to install the cover.

   Tech Tips

   Use the same procedure for both covers.

INSTALL REAR SEAT CUSHION BAND

1. Install the band as shown in the illustration.

INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER RH

Text in Illustration

*1	Hog Ring Pliers

1. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

   Note

   
   

   • Be careful not to damage the cover.

   • When installing the hog rings, avoid wrinkling the cover.

INSTALL NO. 1 SEAT CUSHION COVER RH

1. Install the cover to the seat cushion pad with new tack pins.

INSTALL SEAT CUSHION COVER WITH PAD

1. Attach the hooks to install the seat cushion cover with pad.

2. Connect the seat cushion band to the seat cushion cover.

INSTALL REAR SEAT CUSHION UNDER COVER RH

1. Attach the hooks to install the cover.

INSTALL REAR SEATBACK PROTECTOR

1. Attach the 2 hooks to install the protector.

2. Install the 2 screws.

INSTALL REAR SEAT CUSHION

1. Install the 2 cushions with the 2 screws.