REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side) DISASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE REAR SEAT CUSHION

    A00JVJT

    1. Remove the 2 screws and 2 cushions.

  2. REMOVE REAR SEATBACK PROTECTOR

    A00K29N

    1. Remove the 2 screws.

    2. Detach the 2 hooks and remove the protector.

  3. REMOVE REAR SEAT CUSHION UNDER COVER RH

    A00JWAC

    1. Using a moulding remover, detach the hooks and remove the cover.

  4. REMOVE SEAT CUSHION COVER WITH PAD

    A00K0A6

    1. Disconnect the seat cushion band from the seat cushion cover.

    2. Detach the hooks and remove the seat cushion cover with pad.

  5. REMOVE NO. 1 SEAT CUSHION COVER RH

    A00JVZEE01
    Text in Illustration
    *1 Tack Pin

    1. Cut off the tack pins and remove the cover from the cushion pad.

  6. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER RH

    A00K1HF

    1. Remove the hog rings and seat cushion cover from the seat cushion pad.

  7. REMOVE REAR SEAT CUSHION BAND

    A00JZRD

    1. Remove the band as shown in the illustration.

  8. REMOVE REAR SEAT LEG BRACKET COVER

    A00K0FI

    1. Using a moulding remover, detach the 4 claws and remove the cover.

      Tech Tips

      Use the same procedure for both covers.

  9. REMOVE REAR SEAT LEG COVER

    A00K22P

    1. Detach the claw and guide, and then remove the cover.

      Tech Tips

      Use the same procedure for both covers.

  10. REMOVE NO. 1 SEATBACK BOARD SUB-ASSEMBLY

    A00K1V7

    1. Using a clip remover, detach the 3 clips.

    2. Detach the guide and remove the board.

  11. REMOVE REAR SEAT INNER RECLINING COVER RH

    A00JUFM

    1. Remove the screw.

    2. Detach the 2 guides and remove the cover.

  12. REMOVE REAR SEAT CENTER INNER BELT ASSEMBLY

    A0094KCE02
    Text in Illustration
    *1 Band

    1. Detach the fastening tape and remove the band.

    2. Remove the bolt and inner belt.

  13. REMOVE CENTER SEATBACK COVER SUB-ASSEMBLY

    A00K0DM

    1. Remove the screw.

    2. Detach the 2 guides and remove the cover.

  14. REMOVE CENTER SEATBACK ASSEMBLY

    A00JYXK

    1. Using a T45 "TORX" socket wrench, remove the "TORX" bolt and bush.

    2. Remove the 2 bolts and center seatback.

  15. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY


    1. Remove the headrest.

  16. REMOVE CENTER SEAT HINGE COVER

    A00K1BI

    1. Detach the claw and remove the cover.

  17. REMOVE REAR SEATBACK STAY COVER LH

    A00JWTQ

    1. Detach the 3 claws and remove the cover.

  18. REMOVE REAR SEATBACK STAY COVER RH


    1. A00JY1Z

      Using a T45 "TORX" socket wrench, remove the "TORX" bolt, bush and hinge.

    2. A00JWT4

      Detach the 3 claws and remove the cover.

  19. REMOVE REAR CENTER SEAT ARMREST ASSEMBLY

    A00JVPA

    1. Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts, 2 bushes and armrest.

    2. A00K1YQ

      Remove the bush.

  20. REMOVE NO. 2 CUP HOLDER ASSEMBLY RH

    A00JU0H

    1. Remove the 2 cup holders.

  21. REMOVE REAR SEATBACK COVER


    1. A00JTTP

      Using a screwdriver, detach the 4 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  22. REMOVE REAR SEATBACK LOCK COVER

    A00JWYF

    1. Using a moulding remover, detach the claw.

    2. Move the cover in the direction of the arrow to detach the clip and 2 guides and remove the cover.

  23. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY

    A00JX2U

    1. Detach the 4 claws and 3 clips, and then remove the board.

  24. REMOVE REAR SEAT HEADREST SUPPORT

    A00JX25

    1. Detach the 4 claws and remove the 2 supports.

  25. REMOVE REAR NO. 1 SEAT NO. 2 SIDE PLATE


    1. A00JYU5

      Remove the 2 screws.

    2. A00JX5U

      Using a moulding remover, detach the 3 claws and remove the plate.

  26. REMOVE REAR SEAT LOCK ASSEMBLY RH

    A00JV7A

    1. Detach the clamp and disconnect the wire.

    2. Remove the 2 bolts and lock.

  27. REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY RH

    A00JVPL

    1. Remove the 2 screws and control lever.

  28. REMOVE CENTER NO. 2 SEATBACK COVER

    A00JUSB

    1. Remove the screw.

    2. Detach the 2 claws and remove the cover.

  29. REMOVE REAR SEATBACK LOCK COVER RH

    A00K0LB

    1. Remove the 2 screws.

    2. Detach the 2 guides and remove the cover.

  30. REMOVE REAR SEATBACK LOCK ASSEMBLY RH


    1. A00JYB7

      Remove the 2 hog rings.

    2. A00K1XM

      Remove the 2 bolts.

    3. While moving the release button in the direction of the arrow in the illustration, detach it from the grommet and remove the seatback lock.

  31. REMOVE REAR SEATBACK LOCK RELEASE BUTTON

    A00K1E5

    1. Remove the release button as shown in the illustration.

      Text in Illustration
      A00JWY4 Counterclockwise

  32. REMOVE REAR SEATBACK STOP BUTTON GROMMET

    A00JUIK

    1. Detach the 3 claws and remove the grommet.

  33. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    A00JWKG

    1. Detach the 4 claws and remove the 2 supports.

  34. REMOVE SEAT BELT ANCHOR COVER CAP

    A00JWSKE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and 2 guides, and then remove the cap.

      Tech Tips

      Tape the screwdriver tip before use.

  35. REMOVE REAR SEAT SHOULDER BELT COVER

    A00JXQY

    1. Remove the screw.

    2. Detach the 3 claws and remove the cover.

    3. Disconnect the outer belt from the cover.

  36. REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR

    A00K0C0

    1. Remove the protector from the striker.

  37. REMOVE REAR SEAT LOCK STRIKER

    A00JVK4

    1. Using a T45 "TORX" socket wrench, remove the striker.

  38. REMOVE SEATBACK COVER WITH PAD

    A00JXGCE01
    Text in Illustration
    *1 Hook
    *2 Hog Ring

    1. Remove the hog rings, detach the hook, and then remove the seatback cover with pad.

    2. Disconnect the outer belt from the seatback cover with pad.

  39. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH

    A00JXJM

    1. Remove the hog rings and cover from the seatback pad.

  40. REMOVE REAR SEATBACK EDGE PROTECTOR


    1. Remove the protector from the seatback frame.

  41. REMOVE REAR SEAT SHOULDER BELT GUIDE

    A00JV79

    1. Detach the claw and guide, and then remove the belt guide.

  42. REMOVE NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY RH

    A00999E

    1. Remove the nut and bolt, and then detach the 2 claws and remove the seat belt.

  43. REMOVE REAR NO. 1 SEAT PROTECTOR LH

    A00JXU3

    1. Detach the 2 claws and remove the protector.

  44. REMOVE REAR NO. 1 SEAT PROTECTOR RH

    A00K0MQ

    1. Detach the claw and remove the protector.