REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type LH Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE REAR SEAT CUSHION HINGE COVER RH

    A00JVL2

    1. Using a moulding remover, detach the 3 claws and remove the cover.

  2. REMOVE REAR SEAT CUSHION HINGE COVER LH

    A00JY23

    1. Using a moulding remover, detach the 3 claws and remove the cover.

  3. REMOVE REAR SEAT CUSHION ASSEMBLY LH

    A00K0HB

    1. Pull the rear seat cushion band and release the lock.

    2. Remove the 2 bolts and seat cushion.

      Note

      Be careful not to damage the vehicle body.

  4. REMOVE REAR SEAT HEADREST ASSEMBLY


    1. Remove the headrest.

  5. REMOVE REAR SEATBACK COVER


    1. Press the seatback lock release button to release the lock and fold down the seatback.

    2. A00JTTP

      Using a screwdriver, detach the 4 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY LH

    A00JV3R

    1. Using a clip remover, detach the 5 clips.

    2. Detach the 4 claws and remove the carpet.

  7. REMOVE REAR SEATBACK ASSEMBLY LH

    A00JZ33

    1. Remove the 2 bolts that secure the seatback to the floor.

    2. Fold down the seatback, remove the bolt from the hinge, and then remove the seatback.

      Note

      Be careful not to damage the vehicle body.

  8. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH

    A00JWSF

    1. Remove the bolt and hinge.

  9. REMOVE REAR SEATBACK LOCK CONTROL LEVER BASE LH


    1. A00JW7C

      Using a moulding remover, detach the 6 claws.

    2. Move the cover in the direction of the arrow to detach the 2 guides and remove the lever base.

    3. A00JWV7

      Detach the cable clamp and disconnect the cable.

  10. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (w/ Rear No. 2 Seat)


    1. for Face to Face Seat Type:

      Remove the rear No. 2 seat assembly Click here.

  11. REMOVE REAR DOOR SCUFF PLATE LH

    A00XHCZE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the rear door scuff plate.

    2. Using a screwdriver, detach the 3 clips, 6 claws and 2 guides and remove the rear door scuff plate.

      Tech Tips

      Tape the screwdriver tip before use.

  12. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    A00XDLP

    1. Remove the rear door opening trim weatherstrip.

  13. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover.

  14. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

    A00XHLO

    Tech Tips

    Use the same procedure for the other front luggage compartment trim cover.


    1. Detach the 4 claws and remove the cap.

    2. A00XKI2E01
      Text in Illustration
      *1 Luggage Hold Belt Striker

      Remove the bolt, luggage hold belt striker and front luggage compartment trim cover.

  15. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY

    A00XFDO

    1. Detach the clip and remove the No. 1 deck board.

  16. REMOVE REAR FLOOR REAR MAT SUPPORT PLATE

    A00XGTD

    1. Detach the 5 clips and 4 claws and remove the rear floor mat rear support plate.

  17. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

    A00XDK3

    1. Remove the 3 bolts and floor side rail.

  18. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

    Tech Tips

    Use the same procedure described for the LH side.

  19. REMOVE REAR FLOOR CARPET ASSEMBLY


    1. Detach the 4 claws and remove the rear floor carpet.

      A00XJD9E01
      Text in Illustration
      *A w/o Deck Rail *B w/ Deck Rail
      *C for Face to Face Seat Type - -

  20. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    A00XCE8

    Tech Tips

    Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.


    1. Detach the 3 claws and remove the rear No. 1 seat outer lap belt anchor cover.

  21. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    A00XHK8

    Tech Tips

    Use the same procedure for the other No. 1 luggage compartment trim hook.


    1. Remove the luggage compartment trim hook by turning it clockwise.

  22. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    A00XHNJE01
    Text in Illustration
    *1 Protective Tape

    Tech Tips

    Use the same procedure for the other No. 1 tonneau cover holder cap.


    1. Using a screwdriver, detach the 2 claws and remove the No. 1 tonneau cover holder cap.

      Tech Tips

      Tape the screwdriver tip before use.

  23. REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    A00XI2FE01
    Text in Illustration
    *1 Protective Tape

    Tech Tips

    Use the same procedure for the other front deck side trim cover.


    1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

      Tech Tips

      Tape the screwdriver tip before use.

  24. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. w/o Rear No. 2 Seat:


      1. A00XBXK

        Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

      2. A00XER5

        Detach the 6 claws and 2 guides and disconnect the rear seatback lock control lever base.

      3. Remove the 4 bolts and 2 screws.

      4. Detach the 5 clips and 8 claws.

      5. Pass the rear seatback lock control lever base through the deck trim side panel and remove the deck trim side panel.

        A00XDD2

    2. w/ Rear No. 2 Seat:


      1. A00XBXK

        Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

      2. A00XF16

        Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

      3. Remove the 2 bolts and 2 screws.

      4. Detach the 4 clips and 8 claws and remove the deck trim side panel.

        A00XDFD

  25. REMOVE REAR NO. 2 SEATBACK LOCK STRIKER SUB-ASSEMBLY LH

    A00JVWZ

    1. Remove the 2 bolts.

    2. Detach the claw and remove the striker.

      Note

      Do not wipe off the grease on the sliding portion of the striker.

  26. REMOVE REAR SEAT CUSHION LOCK STRIKER

    A00JV4F

    1. Remove the 2 bolts and striker.