FRONT SEAT ASSEMBLY (for Bench Seat Type) DISASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE SEAT ADJUSTER COVER CAP RH


    1. A00O3EP

      Remove the 2 seat adjuster cover caps.

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH


    1. A00O8L3

      Remove the front seat assembly RH Click here.

    2. Disconnect the occupant detection sensor connector and detach the 3 harness clamps.

    3. Remove the nut and front seat inner belt assembly RH.

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH


    1. A00O7MUE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the claw and remove the reclining adjuster release handle RH.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT CUSHION SHIELD RH


    1. A00O81L

      Detach the 2 rubber bands.

    2. A00O3BDE01

      Remove the screw.

    3. Detach the hook and claw.

    4. Detach the clip and guide, and remove the front seat cushion shield RH.

      Text in Illustration
      *1 Hook
      *2 Guide

  5. REMOVE FRONT SEAT HINGE KNOB


    1. A00O795

      Twist the front seat hinge knob in the direction indicated by the arrow and remove it.

  6. REMOVE FRONT SEAT HINGE COVER RH


    1. A00O3RR

      Remove the 2 screws.

    2. Detach the 2 hooks and remove the front seat hinge cover RH.

  7. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH


    1. A00O40T

      Remove the 2 screws.

    2. Detach the hook and remove the front seat lower cushion shield RH.

  8. REMOVE INNER SEAT BRACKET ASSEMBLY RH


    1. A00O49G

      Temporarily install the front seat hinge knob.

    2. Operate the front seat hinge knob and fold down the seat armrest assembly RH.

    3. A00O6EH

      Raise the seat armrest assembly RH 3 notches.

    4. Remove the front seat hinge knob.

    5. A00O7RD

      Remove the 4 bolts and inner seat bracket assembly RH.

  9. REMOVE SEAT ARMREST ASSEMBLY RH


    1. A00O3V9

      Remove the bolt and seat armrest assembly RH.

  10. REMOVE FRONT SEAT ARMREST HOLE BOARD COVER


    1. A00O2Z1

      Remove the front seat armrest hole board cover from the seat armrest assembly RH.

  11. REMOVE FRONT SEATBACK SIDE COVER SUB-ASSEMBLY RH


    1. A00O3Q5

      Detach the hook and open the front seatback side cover sub-assembly RH.

    2. Remove the front seatback side cover sub-assembly RH with the front seatback inside pad RH.

    3. Remove the front seatback side cover sub-assembly RH from the front seatback inside pad RH.

  12. REMOVE FRONT SEAT CUSHION COVER WITH PAD


    1. A00O4CN

      Bend out the 2 cushion edge tabs.

      Note

      Be careful not to break the cushion edge tabs.

    2. Using a clip remover, remove the clip.

    3. Remove the hog ring and detach the hooks.

      A00O5A7E01
      Text in Illustration
      *1 Hog Ring - -
    4. A00O9S7

      Detach the 2 clamps and remove the connector holder.

    5. Remove the front seat cushion cover with pad from the front seat frame assembly with adjuster RH.

  13. REMOVE CONNECTOR HOLDER


    1. A00OB6S

      Using a precision screwdriver, detach the claw and remove the connector holder.

  14. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A00OBLKE01
      Text in Illustration
      *1 Hog Ring
      *2 Hook

      Remove the hog rings.

    2. Detach the hook.

    3. A00O5ZSE01
      Text in Illustration
      *1 Tack Pin

      Cut off the tack pin.

    4. Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.

  15. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A00O8TA

      Remove the hog rings, and then roll up the separate type front seatback cover.

    2. A00O45G

      Remove the hog rings, detach the 2 straps of the separate type front seatback cover, and then roll up the separate type front seatback cover.

    3. Detach the fastening tape and hook, and then roll up the separate type front seatback cover.

    4. Remove the hog rings and roll up the separate type front seatback cover.

      A00O7MSE01
      Text in Illustration
      *1 Fastening Tape *2 Hook
      *3 Hog Ring - -
    5. A00O3TH

      Detach the 4 claws and remove the 2 front seat headrest supports and separate type front seatback cover from the separate type front seatback pad.

  16. REMOVE SEPARATE TYPE FRONT SEATBACK PAD


    1. A00O306

      Remove the separate type front seatback pad from the front seat frame assembly with adjuster RH.

  17. REMOVE FRONT SEATBACK PROTECTOR

    A00O9TLE01
    Text in Illustration
    *1 Double-sided Tape

    1. Remove the front seatback protector.

    2. Remove any remaining double-sided tape.

  18. REMOVE CENTER SEAT HINGE COVER

    A00OBLP

    1. Remove the screw.

    2. Detach the guide and remove the center seat hinge cover.

  19. REMOVE FRONT SEAT INNER CUSHION SHIELD RH

    A00O9H7

    1. Remove the 2 screws.

    2. Detach the hook and claw and remove the front seat inner cushion shield RH.

  20. REMOVE RECLINING ADJUSTER INSIDE COVER LH

    A00O77U

    1. Remove the screw.

    2. Detach the guide and remove the reclining adjuster inside cover LH.

  21. REMOVE RECLINING ADJUSTER INSIDE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  22. REMOVE RECLINING ADJUSTER OUTSIDE COVER LH

    A00OAM6

    1. Remove the screw and reclining adjuster outside cover LH.

  23. REMOVE RECLINING ADJUSTER OUTSIDE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  24. REMOVE OUTER VERTICAL ADJUSTER BRACKET COVER

    A00O8OF

    1. Remove the screw.

    2. Detach the claw and remove the outer vertical adjuster bracket cover.

  25. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR


    1. A00OBL4

      Remove the 2 front seat cushion edge protectors.

  26. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH


    1. A00O9JH

      Remove the front seat cushion edge protector RH.