POWER SEAT SWITCH (w/o Memory) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT POWER SEAT SWITCH LH


    1. Connect the power seat switch connector.

    2. Install the power seat switch with the 3 screws.

  2. INSTALL FRONT SEAT CUSHION SHIELD LH


    1. Attach the 3 wire harness clamps and connect the seat wire connector.

    2. Attach the 3 claws to close the wire harness cover.

    3. Remove the clip attached to the seat cushion spring and install it to the cushion shield.

      A00XC3S

    4. Attach the 2 clips, 3 claws and guide.

    5. Attach the guide of the front seat No. 1 inner cushion shield and install the screw.

    6. Connect the lifter motor connector.

  3. INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. A00XJBW

      Attach the 2 claws to install the knob.

  4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A00XD3C

    1. Attach the 2 claws to install the knob.

  5. INSTALL FRONT SEAT ASSEMBLY


    1. Install the front seat assembly Click here.