PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:B2036

DTC Code DTC Name
B2036 Power Supply Relay Malfunction Open

DESCRIPTION

This DTC is stored during the seat belt control ECU self-diagnosis or when power is not supplied to the seat belt control ECU.

DTC Code DTC Detection Condition Trouble Area
B2036 An open in the power supply circuit.

  • Harness or connector

  • Seat belt control ECU

WIRING DIAGRAM

A0099ESE01

INSPECTION PROCEDURE

Note

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE


  1. CHECK HARNESS AND CONNECTOR (SEAT BELT CONTROL ECU - BATTERY AND BODY GROUND)


    1. A0096OAE03
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Seat Belt Control ECU)

      Disconnect the G118 ECU connector.

    2. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Condition Specified Condition
      G118-7 (+B) - Body ground Always 11 to 14 V

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      G118-8 (PGND) - Body ground Always Below 1 Ω

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

    REPLACE SEAT BELT CONTROL ECU Click here