PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:B2060

DTC Code DTC Name
B2060 ABS Malfunction

DESCRIPTION

This DTC is stored when a malfunction in the brake system is detected. This circuit consists of the skid control ECU and seat belt control ECU. Signals are sent from the skid control ECU to the seat belt control ECU through the CAN communication line.

DTC Code DTC Detection Condition Trouble Area
B2060 While the initial check is running, the ignition switch is ON and the pre-crash safety system is operating, a brake system malfunction signal is received from the skid control ECU for 1 second.

  • Vehicle stability control system

  • Seat belt control ECU

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK FOR DTC (VEHICLE STABILITY CONTROL SYSTEM)


    1. Check for DTCs Click here.

      OK
      Vehicle stability control system DTCs are not output.

    NG

    GO TO VEHICLE STABILITY CONTROL SYSTEM Click here

    OK

  2. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      OK
      DTC B2060 is not output.

    NG

    REPLACE SEAT BELT CONTROL ECU Click here

    OK

    USE SIMULATION METHOD TO CHECK Click here