CURTAIN SHIELD AIRBAG ASSEMBLY INSTALLATION

Tech Tips

Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.

INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)
1. Install the curtain shield airbag with the 17 new bolts.
  
  Torque:
  
  9.8 N*m { 100 kgf*cm, 87 in.*lbf }
  
  Note
  
  Do not twist the curtain shield airbag when installing it.
2. Connect the connector.
  
  Note
  
  When handling the airbag connector, take care not to damage the airbag wire harness.
INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)
1. Install the curtain shield airbag with the 13 new bolts.
  
  Torque:
  
  9.8 N*m { 100 kgf*cm, 87 in.*lbf }
  
  Note
  
  Do not twist the curtain shield airbag when installing it.
2. Connect the connector.
  
  Note
  
  When handling the airbag connector, take care not to damage the airbag wire harness.
INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (for 3 Door)
1. Install the curtain shield airbag with the 11 new bolts.
  
  Torque:
  
  9.8 N*m { 100 kgf*cm, 87 in.*lbf }
  
  Note
  
  Do not twist the curtain shield airbag when installing it.
2. Connect the connector.
  
  Note
  
  When handling the airbag connector, take care not to damage the airbag wire harness.
INSTALL REAR NO. 2 SIDE RAIL SPACER LH (for 3 Door)
1. Attach the 4 claws to install the rear side rail spacer.
2. Install the clip.
INSTALL NO. 1 AIR DUCT REAR SIDE (w/ Rear Cooler)
1. Insert the upper part of the duct into the roof side duct and, using that point as a pivot point, swing the duct into place and install it to the rear cooling unit.
2. Attach the 2 claws to install the cooler plate.
INSTALL NO. 2 AIR DUCT REAR SIDE (w/ Rear Cooler)
1. Install the duct with the 2 clips and attach the clamp.
INSTALL ROOF HEADLINING ASSEMBLY
1. for 5 Door:
  1. Install the roof headlining Click here.
2. for 3 Door:
  1. Install the roof headlining Click here.