AIRBAG SYSTEM, Diagnostic DTC:B1630/23, B1635/24

DTC Code DTC Name
B1630/23 Rear Airbag Sensor RH Circuit Malfunction
B1635/24 Rear Airbag Sensor LH Circuit Malfunction

DESCRIPTION

The rear airbag sensor consists of the safing sensor, diagnostic circuit, lateral deceleration sensor, etc.

If the center airbag sensor receives signals from the lateral deceleration sensor, it determines whether the SRS should be activated.

DTC B1630 or B1635 is stored when a malfunction is detected in the rear airbag sensor circuit.

DTC Code DTC Detection Condition Trouble Area
B1630/23

Either condition is met:


  • A rear airbag sensor RH malfunction.

  • A center airbag sensor malfunction.

  • Rear airbag sensor RH

  • Center airbag sensor assembly
B1635/24

Either condition is met:


  • A rear airbag sensor LH malfunction.

  • A center airbag sensor malfunction.

  • Rear airbag sensor LH

  • Center airbag sensor assembly

WIRING DIAGRAM

A0097VOE11
A0097VOE12

INSPECTION PROCEDURE

Note

When disconnecting the cable from the negative (-) battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected Click here.

PROCEDURE


  1. CHECK FOR DTC


    1. Turn the ignition switch to ON.

    2. Clear the DTCs stored in memory Click here.

    3. Turn the ignition switch off.

    4. Turn the ignition switch to ON, and wait for at least 60 seconds.

    5. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC B1630 and B1635 are not output A
      DTC B1635 is output B
      DTC B1630 is output C

      Tech Tips

      Codes other than DTC B1630 and B1635 may be output at this time, but they are not related to this check.


    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    CHECK REAR AIRBAG SENSOR LH Click here

    C

  2. CHECK REAR AIRBAG SENSOR RH


    1. A00994TE03
      Text in Illustration
      *1 Rear Airbag Sensor LH
      *2 Center Airbag Sensor

      Turn the ignition switch off.

    2. Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.

    3. Interchange the rear airbag sensor LH with RH and connect the connectors to them.

    4. Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.

    5. Turn the ignition switch to ON, and wait for at least 60 seconds.

    6. Clear the DTCs stored in memory Click here.

    7. Turn the ignition switch off.

    8. Turn the ignition switch to ON, and wait for at least 90 seconds.

    9. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC B1630 and B1635 are not output A
      DTC B1635 is output (for 3 door) B
      DTC B1635 is output (for 5 door) C
      DTC B1630 is output D

      Tech Tips

      Codes other than DTC B1630 and B1635 may be output at this time, but they are not related to this check.

    10. Turn the ignition switch off.

    11. Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.

    12. Return the rear airbag sensor LH and RH to their original positions and connect the connectors to them.


    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE REAR AIRBAG SENSOR RH (for 3 Door) Click here

    C

    REPLACE REAR AIRBAG SENSOR RH (for 5 Door) Click here

    D

    REPLACE CENTER AIRBAG SENSOR ASSEMBLY Click here

  3. CHECK REAR AIRBAG SENSOR LH


    1. A009B71E01
      Text in Illustration
      *1 Rear Airbag Sensor RH
      *2 Center Airbag Sensor

      Turn the ignition switch off.

    2. Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.

    3. Interchange the rear airbag sensor LH with RH and connect the connectors to them.

    4. Connect the cable to the negative (-) battery terminal, and wait for at least 2 seconds.

    5. Turn the ignition switch to ON, and wait for at least 60 seconds.

    6. Clear the DTCs stored in memory Click here.

    7. Turn the ignition switch off.

    8. Turn the ignition switch to ON, and wait for at least 90 seconds.

    9. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC B1630 and B1635 are not output A
      DTC B1630 is output (for 3 Door) B
      DTC B1630 is output (for 5 Door) C
      DTC B1635 is output D

      Tech Tips

      Codes other than DTC B1630 and B1635 may be output at this time, but they are not related to this check.

    10. Turn the ignition switch off.

    11. Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.

    12. Return the rear airbag sensor LH and RH to their original positions and connect the connectors to them.


    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE REAR AIRBAG SENSOR LH (for 3 Door) Click here

    C

    REPLACE REAR AIRBAG SENSOR LH (for 5 Door) Click here

    D

    REPLACE CENTER AIRBAG SENSOR ASSEMBLY Click here