ROOM LIGHT SWITCH INSPECTION


  1. INSPECT ROOM LIGHT SWITCH ASSEMBLY


    1. A0094AJE01
      Text in Illustration
      *a

      Component without harness connected

      (Room Light Switch)

      Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      3 (UP) - 4 (E) Light control switch off 10 kΩ or higher
      Light control switch UP Below 1 Ω
      2 (DOWN) - 4 (E) Light control switch off 10 kΩ or higher
      Light control switch DOWN Below 1 Ω

    2. Apply battery voltage to the connector and check the LED illumination.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 5 (ILL+)

      Battery negative (-) → Terminal 1 (E)

      		 LED illuminates

      If the result is not as specified, replace the room light switch assembly.