DOOR COURTESY LIGHT (for Front) INSTALLATION

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL COURTESY LIGHT BULB


    1. Install the bulb.

  2. INSTALL FRONT DOOR COURTESY LIGHT ASSEMBLY LH


    1. Connect the connector.

    2. Attach the 2 claws to install the light.

  3. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP LH


    1. A00O9AZ

      Install the front door inner glass weatherstrip.

  4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A00O32D

      Install the clamp to the door panel.

    2. Connect the rear door lock remote control cable assembly and rear door inside locking cable assembly.

    3. Connect each connector.

    4. A00O5NC

      Attach the rear door trim board sub-assembly by attaching the 4 claws of the rear door inner glass weatherstrip as shown in the illustration.

    5. Attach the 9 clips and install the rear door trim board sub-assembly.

    6. Install the 3 screws.

  5. INSTALL FRONT DOOR ARMREST COVER LH


    1. A00OBDH

      Attach the 8 claws to install the assist grip cover.

  6. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH


    1. A00O3XZ

      Attach the 3 claws to install the door inside handle bezel.

  7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH


    1. Attach the 2 claws to install the front door lower frame bracket garnish.