PERSONAL LIGHT (for Rear Door) INSTALLATION

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. INSTALL REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH


    1. A0096A9

      Connect the connector.

    2. Attach the claw to install the light.

  2. INSTALL NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY


    1. A0097CN

      Turn the light in the direction indicated by the arrow to install it.

    2. Attach the clamp.

    3. Connect the connector.

  3. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP LH


    1. A00O6BR

      Attach the 3 claws to install the rear door inner glass weatherstrip as shown in the illustration.

  4. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A00O32D

      Install the clamp to the door panel.

    2. Connect the rear door lock remote control cable assembly and rear door inside locking cable assembly.

    3. Connect each connector.

    4. A00O5NC

      Attach the rear door trim board sub-assembly by attaching the 4 claws of the rear door inner glass weatherstrip as shown in the illustration.

    5. Attach the 9 clips and install the rear door trim board sub-assembly.

    6. Install the 3 screws.

  5. INSTALL FRONT DOOR ARMREST COVER LH


    1. A00OBDH

      Attach the 8 claws to install the assist grip cover.

  6. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH


    1. A00O3XZ

      Attach the 3 claws to install the door inside handle bezel.