SECURITY HORN ASSEMBLY (w/ Built-in Battery type) REMOVAL


  1. REMOVE REAR NO. 2 SEAT ASSEMBLY


    1. for Manual Seat Type:

      Remove the rear No. 2 seat assembly Click here.

    2. for Power Seat Type:

      Remove the rear No. 2 seat assembly Click here.

    3. for Face to Face Seat Type:

      Remove the rear No. 2 seat assembly Click here.

  2. REMOVE REAR NO. 1 SEATBACK ASSEMBLY


    1. for 60/40 Split Double-folding Seat Type LH Side:

      Remove the rear No. 1 seatback assembly Click here.

    2. for 60/40 Split Double-folding Seat Type RH Side:

      Remove the rear No. 1 seatback assembly Click here.

  3. REMOVE NO. 1 REAR FLOOR STEP COVER (w/ Rear No. 2 Seat)

    A00JZ7WE01
    Text in Illustration
    *1 Protective Tape

    Tech Tips

    Use the same procedure for all rear No. 1 floor step covers.


    1. Using a screwdriver, detach the 2 claws and remove the rear No. 1 floor step cover.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE QUARTER SCUFF PLATE INNER RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. REMOVE OUTER LAP BELT ANCHOR COVER

    A00K27T

    Tech Tips

    Use the same procedure for the other outer lap belt anchor cover.


    1. Detach the 3 claws and remove the outer lap belt anchor cover.

  8. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover.

  9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

    A00JTVJ

    Tech Tips

    Use the same procedure for the other front luggage compartment trim cover.


    1. Detach the 4 claws and remove the cap.

    2. A00K12YE01
      Text in Illustration
      *1 Luggage Hold Belt Striker

      Remove the bolt, luggage hold belt striker and front luggage compartment trim cover.

  10. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

    A00JYFE

    1. Detach the clip and remove the No. 1 deck board.

  11. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

    A00K21N

    1. Detach the 5 clips and 4 claws and remove the rear floor mat rear support plate.

  12. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

    Tech Tips

    Use the same procedure described for the LH side.

  13. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

    A00JWE5

    1. Remove the 3 bolts and floor side rail.

  14. REMOVE REAR FLOOR CARPET ASSEMBLY


    1. Detach the 4 claws and remove the rear floor carpet.

      A00JXQEE01
      Text in Illustration
      *A w/o Deck Rail *B w/ Deck Rail
      *C for Face to Face Seat Type - -

  15. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    A00JXNO

    Tech Tips

    Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.


    1. Detach the 3 claws and remove the rear No. 1 seat outer lap belt anchor cover.

  16. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    A00JZHD

    Tech Tips

    Use the same procedure for the other No. 1 luggage compartment trim hook.


    1. Remove the luggage compartment trim hook by turning it clockwise.

  17. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    A00JYCIE01
    Text in Illustration
    *1 Protective Tape

    Tech Tips

    Use the same procedure for the other No. 1 tonneau cover holder cap.


    1. Using a screwdriver, detach the 2 claws and remove the No. 1 tonneau cover holder cap.

      Tech Tips

      Tape the screwdriver tip before use.

  18. REMOVE FRONT DECK SIDE TRIM COVER RH (w/ Tonneau Cover)

    A00JX1FE01
    Text in Illustration
    *1 Protective Tape

    Tech Tips

    Use the same procedure for the other front deck side trim cover.


    1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

      Tech Tips

      Tape the screwdriver tip before use.

  19. REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

    A00JTRLE01
    Text in Illustration
    *1 Protective Tape

    Tech Tips

    Use the same procedure for all assist grip plugs.


    1. Using a screwdriver, detach the 2 claws and remove the assist grip plug.

      Tech Tips

      Tape the screwdriver tip before use.

  20. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

    A00K1H6

    Tech Tips

    Use the same procedure for the other assist grip.


    1. Remove the 2 bolts and assist grip.

  21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH


    1. w/o Rear No. 2 Seat:


      1. A00JU0C

        Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

      2. A00K0RB

        Detach the 6 claws and 2 guides and disconnect the rear seatback lock control lever base.

      3. Remove the 4 bolts and screws.

      4. Detach the 5 clips and 8 claws.

      5. Disconnect each connector.

      6. Pass the rear seatback lock control lever base through the deck trim side panel and remove the deck trim side panel.

        A00JYBI

    2. w/ Rear No. 2 Seat:


      1. A00JU0C

        Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

      2. A00JTWE

        Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

      3. Remove the 2 bolts and screw.

      4. Detach the 4 clips and 8 claws.

      5. Disconnect each connector and remove the deck trim side panel.

        A00K0Q1

  22. REMOVE REAR SIDE NO. 2 AIR DUCT


    1. A00JWV1

      Detach the 2 clips.

    2. Detach the clamp and remove the duct.

  23. REMOVE THEFT WARNING SIREN ASSEMBLY (for 5 Door)


    1. A00O5LB

      Remove the 2 bolts.

    2. Detach the claw and remove the guide.

    3. Disconnect the connector and remove the theft warning siren assembly.

  24. REMOVE REAR SEAT ASSEMBLY (for 3 Door)


    1. for 60/40 Split Tumble Seat Type LH Side:

      Remove the rear seat assembly Click here.

    2. for 60/40 Split Tumble Seat Type RH Side:

      Remove the rear seat assembly Click here

  25. REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for 3 Door)

    Tech Tips

    Use the same procedure described for the LH side.

  26. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for 3 Door)

    Tech Tips

    Use the same procedure described for the LH side.

  27. REMOVE TONNEAU COVER ASSEMBLY (for 3 Door)


    1. Remove the tonneau cover.

  28. REMOVE MAT SET PLATE COVER (for 3 Door)

    A00K0R9E01
    Text in Illustration
    *1 Protective tape

    Tech Tips

    Use the same procedure for all mat set plate covers.


    1. Using a screwdriver, detach the 2 claws and remove the mat set plate cover.

      Tech Tips

      Tape the screwdriver tip before use.

  29. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (for 3 Door)

    A00JXEQ

    1. Remove the 5 screws.

    2. Detach the 6 claws and remove the rear floor mat rear support plate.

  30. REMOVE QUARTER TRIM COVER HOLE (for 3 Door)

    A00JWNT

    1. Detach the 2 claws and 2 guides and remove the quarter trim cover hole.

  31. REMOVE REAR FLOOR CARPET ASSEMBLY (for 3 Door)

    A00JXUH

    1. Remove the rear floor carpet.

  32. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for 3 Door)

    A00JZHD

    Tech Tips

    Use the same procedure for the other No. 1 luggage compartment trim hook.


    1. Remove the luggage compartment trim hook by turning it clockwise.

  33. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (for 3 Door)

    A00K0X1E01
    Text in Illustration
    *1 Protective tape

    Tech Tips

    Use the same procedure for the other tonneau cover holder cap.


    1. Using a screwdriver, detach the 2 claws and remove the tonneau cover holder cap.

      Tech Tips

      Tape the screwdriver tip before use.

  34. REMOVE FRONT DECK SIDE TRIM COVER (for 3 Door)

    A00JX1FE01
    Text in Illustration
    *1 Protective tape

    Tech Tips

    Use the same procedure for the other front deck side trim cover.


    1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

      Tech Tips

      Tape the screwdriver tip before use.

  35. REMOVE QUARTER TRIM POCKET TRAY (for 3 Door)

    A00K1QZE01
    Text in Illustration
    *1 Protective tape

    1. Put protective tape around the quarter trim pocket tray.

    2. Using a screwdriver, detach the 6 claws and 2 guides, and remove the quarter trim pocket tray.

      Tech Tips

      Tape the screwdriver tip before use.

  36. REMOVE OUTER LAP BELT ANCHOR COVER (for 3 Door)

    A00JV70

    Tech Tips

    Use the same procedure for the other outer lap belt anchor cover.


    1. Detach the 3 claws and remove the outer lap belt anchor cover.

  37. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for 3 Door)

    A00JVMW

    1. Remove the bolt and disconnect the front seat outer belt floor anchor.

    2. A00K0LJ

      Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

    3. Remove the 3 bolts and 2 screws.

    4. Detach the 9 claws and 12 clips.

    5. Disconnect the connector and remove the deck trim side panel.

      A00JZOE

  38. REMOVE THEFT WARNING SIREN ASSEMBLY (for 3 Door)


    1. A00OA1R

      Remove the 2 bolts.

    2. Detach the claw and remove the guide.

    3. Disconnect the connector and remove the theft warning siren assembly.