TRANSPONDER KEY AMPLIFIER REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE INSTRUMENT SIDE PANEL LH

    A00XFTUE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument side panel.

    2. Using a moulding remover, detach the 5 clips, claw and 3 guides and remove the instrument side panel.

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)

    A00XGFYE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the instrument panel ornament.

    2. Using a moulding remover, detach the 5 clips and remove the instrument panel ornament.

  3. REMOVE INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)

    A00XGH6

    1. Detach the 4 clips.

    2. Disconnect each connector and remove the instrument panel finish plate garnish.

  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    A00XK5H

    1. Detach the 4 clips.

    2. Disconnect each connector and remove the instrument panel finish panel.

  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    A00XHNB

    1. Detach the 4 claws, 2 clips and 2 guides and remove the instrument cluster finish panel.

  6. REMOVE LOWER STEERING COLUMN COVER


    1. A00JZNE

      Remove the 2 screws.

    2. Detach the 2 claws and remove the steering column lower cover.

  7. REMOVE UPPER STEERING COLUMN COVER


    1. A00JWPA

      Detach the 4 clips.

    2. Detach the claw and remove the steering column upper cover.

  8. REMOVE TRANSPONDER KEY AMPLIFIER


    1. A0094FP

      Remove the screw and cover.

    2. A00954I

      Turn the key amplifier as shown in the illustration to detach the 2 claws and remove the key amplifier.

    3. Disconnect the connector.