ENGINE HOOD COURTESY SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE UPPER RADIATOR SUPPORT SEAL


    1. Remove the 13 clips and upper radiator support seal.

  2. REMOVE RADIATOR GRILLE

    A009AE1E01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the radiator grille.

    2. Remove the 2 clips and 2 bolts.

    3. Detach the 8 claws and remove the radiator grille.

  3. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    A009BH6

    1. Disconnect the sensor connector.

    2. Remove the 3 bolts and sensor.

  4. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR


    1. A009BQV

      Detach the 2 clamps and 2 guides, and remove the hood lock release lever protector.

  5. REMOVE LOW PITCHED HORN ASSEMBLY (for LHD)

    A0094EGE01
    Text in Illustration
    *1 Connector

    1. Disconnect the connector.

    2. Remove the bolt and low pitched horn.

  6. REMOVE HIGH PITCHED HORN ASSEMBLY (for LHD)

    A00983BE01
    Text in Illustration
    *1 Connector

    1. Disconnect the connector.

    2. Remove the bolt and high pitched horn.

  7. REMOVE HOOD LOCK CONTROL CABLE COVER


    1. A0097IOE02
      Text in Illustration
      *A for LHD
      *B for RHD

      Remove the 2 bolts.

    2. Detach the claw and remove the hood lock control cable cover.

  8. REMOVE HOOD LOCK ASSEMBLY


    1. A009639

      Remove the 3 bolts and hood lock nut.

    2. A0099ZQ

      Disconnect the connector.

    3. Disconnect the hood lock control cable and remove the hood lock assembly.