ENTRY LOCK AND UNLOCK SWITCH INSPECTION


  1. INSPECT BACK DOOR ELECTRICAL KEY SWITCH


    1. Check the operation of the switch.


      1. A009BSEE04
        Text in Illustration
        *a

        Component without harness connected

        (Back Door Electrical Key Switch)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        2 (L) - 3 (B) Lock switch not pushed 10 kΩ or higher
        Lock switch pushed Below 1 Ω
        5 (UL) - 6 (E) Unlock switch Not pushed 10 kΩ or higher
        Unlock switch pushed Below 1 Ω

        If the result is not specified, replace the back door electrical key switch.