DOOR CONTROL TRANSMITTER (w/ Entry and Start System) INSTALLATION

Note

Take extra care when handling these precision electronic components.


  1. INSTALL TRANSMITTER BATTERY


    1. A00K0D5

      Install the battery (lithium battery: CR1632) with the positive (+) side facing upward, as shown in the illustration.

      Note


      • Do not bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

    2. Install the transmitter housing cover by pressing down on it.

    3. Insert the emergency key into the transmitter.

    4. Press one of the transmitter switches and check that the LED illuminates.