UNLOCK WARNING SWITCH INSPECTION


  1. INSPECT UNLOCK WARNING SWITCH ASSEMBLY

    A00JVHTE05
    Text in Illustration
    *a Not Pushed
    *b Pushed
    *c

    Component without harness connected

    (Unlock Warning Switch Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (UN+) - 2 (UN-) Not pushed 10 kΩ or higher
      Pushed Below 1 Ω

      If the result is not as specified, replace the unlock warning switch assembly.