POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch ON.

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize Setting / Door Lock.

      5. Select the setting by referring to the table below.

        Door Lock
        Display Default Content Setting Relevant ECU
        Unlock Key Twice OFF Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors ON or OFF Main body ECU (multiplex network body ECU)
        Auto Lock* ON Function that locks all doors when the vehicle speed reaches a certain level ON or OFF Main body ECU (multiplex network body ECU)
        Auto Lock/Shift* OFF Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed ON or OFF Main body ECU (multiplex network body ECU)
        Auto Unlock/Shift* OFF Function that unlocks all doors when the shift lever is moved to P from any position other than P while the ignition switch is ON ON or OFF Main body ECU (multiplex network body ECU)
        All Unlock/Open-Close* OFF Function that unlocks the other doors when the driver door is opened within 43 seconds after the ignition switch is turned off ON or OFF Main body ECU (multiplex network body ECU)

        • *: w/ Collision door lock release function