CAN COMMUNICATION SYSTEM (for LHD with Entry and Start System) SYSTEM DIAGRAM


  1. SYSTEM DIAGRAM

    A00L0DTE01
    No. ECU/Sensor Name
    1 ECM
    2 Power management control ECU
    3 Main body ECU (multiplex network body ECU)
    4 Master cylinder solenoid (skid control ECU)
    5 Four wheel drive control ECU
    6 Yaw rate sensor assembly
    7 DLC3
    8 Spiral cable sub-assembly (steering angle sensor)
    9 Power steering ECU assembly
    10 Display and navigation module display*1
    11 Certification ECU
    12 Center airbag sensor assembly
    13 Combination meter assembly
    14 Air conditioning amplifier assembly
    15 Suspension control ECU*2
    16 Headlight swivel ECU assembly (AFS ECU)*3
    17 Seat belt control ECU*4
    18 Stabilizer control ECU*5
    19 Driving support ECU assembly*6
    20

    Parking assist ECU*7

    Clearance warning ECU assembly*8
    21 No. 5 junction connector
    22 Front power seat switch LH*9
    23 Multiplex tilt and telescopic ECU*10
    24 Driving support switch control ECU*11
    25 No. 6 junction connector
    26 Transmission control ECU assembly*12

    • *1: w/ Navigation System

    • *2: w/ Air Suspension System

    • *3: w/ Adaptive Front-lighting System

    • *4: w/ Pre-crash Safety System

    • *5: w/ Kinetic Dynamic Suspension System

    • *6: w/ Dynamic Radar Cruise Control System

    • *7: w/ Parking Assist Monitor System and/or Side Monitor System

    • *8: w/ TOYOTA Parking Assist-sensor System (for 8 Sensor Type)

    • *9: w/ Seat Position Memory

    • *10: for Power Tilt and Power Telescopic Steering Column

    • *11: w/ Multi-function Switch

    • *12: for 1KD-FTV

  2. V1 BUS

    A00L0ZTE01
    A00KWF1E01

  3. V2 BUS

    A00KVMIE01

  4. MS BUS

    A00KSJME01

  5. POWER MANAGEMENT BUS

    A00KYL3E04

  6. POWERTRAIN BUS (for 1KD-FTV)

    A00KX2WE01