CHARGING SYSTEM PRECAUTION


  1. Check that the battery cables are connected to the correct terminals.

  2. Disconnect the battery cables when the battery is given a quick charge.

  3. Do not perform tests with a high voltage insulation resistance tester.

  4. Never disconnect the battery while the engine is running.

  5. Check that the charging cable nut is tightened on terminal B of the generator and the engine room relay block.

  6. IGNITION SWITCH EXPRESSION

    Tech Tips

    The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

    Expression Ignition Switch (Position) Engine Switch (Condition)
    Ignition Switch off Lock Off
    Ignition Switch ACC ACC On (ACC)
    Ignition Switch ON ON On (IG)
    Engine Start START Start