ULTRASONIC SENSOR (for Front) INSTALLATION


  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER

    A009AHKE01
    Text in Illustration
    *1 Keyhole

    Tech Tips

    Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.


    1. Align the keyhole and protrusion as shown in the illustration.

    2. Install the ultrasonic sensor retainer to the front bumper cover.

      Note

      Do not damage the bumper cover with the protrusion when installing the retainer.

  2. INSTALL NO. 1 ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure to install the No. 1 ultrasonic sensor on the other side.


    1. Attach the 2 claws to install the No. 1 ultrasonic sensor.

    2. Connect the connector.

  3. INSTALL FRONT BUMPER COVER


    1. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Connect the 3 connectors.

    2. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:

      Connect the 2 connectors.

    3. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Connect the connector.

    4. w/ Headlight Cleaner System:

      Connect the headlight cleaner hose.

    5. Attach the 12 claws to install the front bumper cover.

    6. Install the 2 bolts labeled A, 2 bolts labeled B, 6 screws and 6 clips.

      Torque:
      bolt A
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
      A0099DZE02
      Text in Illustration
      *1 Bolt A *2 Bolt B

  4. INSTALL RADIATOR GRILLE


    1. Attach the 8 claws to install the radiator grille.

    2. Install the 2 screws and 2 clips.

  5. INSTALL FRONT BUMPER SIDE SEAL LH


    1. Attach the 4 clips to install the front bumper side seal.

  6. INSTALL FRONT BUMPER SIDE SEAL RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL UPPER RADIATOR SUPPORT SEAL


    1. Install the upper radiator support seal with the 13 clips.