TELEVISION CAMERA (for Side) INSTALLATION


  1. INSTALL SIDE TELEVISION CAMERA ASSEMBLY


    1. Install the side television camera with the 3 screws.

    2. Connect the connector.

    3. A00949AE01

      Attach the claw as shown in the illustration to install the part labeled A to the part labeled B.

      Note

      Be careful not to break the claw.

    4. Attach the part labeled C as shown in the illustration.

      A0099A5E01

    5. Install the 5 screws.

    6. Using a T25 "TORX" socket wrench, install the 3 screws.

      Tech Tips


      • Clean the threads of the screw with non-residue solvent.

      • Apply adhesive to the threads of the screw.

        Adhesive
        Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
    7. A009C1D

      Attach the 8 claws to install the lower cover.

    8. Attach the 4 claws to install the rubber base.

    9. Install the screw.

    10. A009AAPE02
      Text in Illustration
      *1 Tape

      Apply 2 new pieces of tape so that they overlap.

  2. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. Connect the connector.

    2. Install the light with the 3 screws.

  3. INSTALL OUTER MIRROR COVER


    1. Install the outer mirror cover.


      1. A00KVVGE01
        Text in Illustration
        *1 Rib

        Insert the rib on the outer edge of the cover into the groove of the mirror body.

        Note

        Do not scratch the turn light.

      2. A00KXXOE01

        Confirm that the cover and mirror body are aligned properly, and then push the outer end of the cover to attach the outer claws.

        Note


        • Make sure that the upper ribs of the cover shown in part A of the illustration are properly attached to the mirror body.

        • Make sure that the ribs of the mirror body shown in part B of the illustration are not protruding from the cover.

        Text in Illustration
        *1 Rib
      3. A00KUZN

        While making sure that the rib of the cover fits properly into the groove of the mirror body, squeeze the inner end of the cover and the mirror body together to attach the inner claws.

      4. A00KWD0

        Push on the cover at the locations of the 8 claws to confirm that the claws are attached properly.

  4. INSTALL OUTER REAR VIEW MIRROR GLASS


    1. w/ Mirror Heater:

      Connect the 2 connectors.

    2. A0099Q4

      Attach the 4 claws to install the mirror glass.

  5. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH


    1. Install the outer rear view mirror Click here.

  6. ADJUST SIDE TELEVISION CAMERA ASSEMBLY

    Tech Tips

    Adjust the side television camera for the passenger side only.


    1. w/ Rear View Monitor System:

      Adjust the side television camera Click here.

    2. w/ Parking Assist Monitor System:

      Adjust the side television camera Click here.