| When auto-display mode is set, display does not change to appropriate screen even though vehicle speed exceeds display permission vehicle speed (approximately 12 km/h [7 mph] or less) |
Vehicle Stability Control System (for Hydraulic Brake Booster) |
Click here
|
| Vehicle Stability Control System (for Vacuum Brake Booster) |
Click here
|
| Replace parking assist ECU (for LHD) |
Click here
|
| Replace parking assist ECU (for RHD) |
Click here
|
| When auto-display mode is set, display does not change from displayed screen even though vehicle speed is reduced to display permission vehicle speed (approximately 10 km/h [6 mph] or less) |
Vehicle Stability Control System (for Hydraulic Brake Booster) |
Click here
|
| Vehicle Stability Control System (for Vacuum Brake Booster) |
Click here
|
| Replace parking assist ECU (for LHD) |
Click here
|
| Replace parking assist ECU (for RHD) |
Click here
|
| When auto-display mode is set, display does not change from displayed screen even though shift lever is moved to position other than P or R |
Proceed to "CHK" message(s) are displayed on the SIGNAL CHECK screen |
Click here
|
| Replace parking assist ECU (for LHD) |
Click here
|
| Replace parking assist ECU (for RHD) |
Click here
|
| When auto-display mode is not set, display does not change from displayed screen even though operating wide view front and side monitor switch while within display permission vehicle speed (approximately 12 km/h [7 mph] or less) |
Proceed to "CHK" message(s) are displayed on the SIGNAL CHECK screen |
Click here
|
| Replace parking assist ECU (for LHD) |
Click here
|
| Replace parking assist ECU (for RHD) |
Click here
|