REAR VIEW MONITOR SYSTEM (w/ Side Monitor System) TERMINALS OF ECU


  1. CHECK PARKING ASSIST ECU

    A00952RE11

    1. Measure the voltage, resistance and check for pulses according to value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      I3-1 (+B) - I3-3 (GND1) L - W-B Power source signal Always 11 to 14 V
      I3-3 (GND1) - Body ground W-B - Body ground Ground Always Below 1 Ω
      I3-7 (IG) - I3-3 (GND1) L - W-B IG power source signal Ignition switch ON 11 to 14 V
      I3-8 (ACC) - I3-3 (GND1) P - W-B ACC power source signal Ignition switch ACC 11 to 14 V
      I2-11 (CV-) - I3-3 (GND1) W - W-B Rear television camera ground Always Below 1 V
      I2-12 (CV+) - I2-11 (CV-) R - W Rear television camera display signal (NTSC) input Ignition switch ON, shift lever in R

      Pulse generation

      (See waveform 1)
      Ignition switch ON, shift lever in R, screen blacked out by covering camera lens

      Pulse generation

      (See waveform 2)
      I2-13 (CGND) - I3-3 (GND1) GR - W-B Rear television camera shielded ground Always Below 1 V
      I2-14 (CB+) - I3-3 (GND1) B - W-B Power source to rear television camera Ignition switch ON, shift lever in R 5.8 to 7.05 V
    2. A00963BE01

      Using an oscilloscope, check waveform 1.

      Measurement Condition
      Item Content
      Terminal No. (Symbol) I2-12 (CV+) - I2-11 (CV-)
      Tool Setting 0.2 V/DIV., 50 μsec./DIV.
      Condition Ignition switch ON, shift lever in R
    3. A009BJKE01

      Using an oscilloscope, check waveform 2.

      Measurement Condition
      Item Content
      Terminal No. (Symbol) I2-12 (CV+) - I2-11 (CV-)
      Tool Setting 0.2 V/DIV., 50 μsec./DIV.
      Condition Ignition switch ON, shift lever in R, screen blacked out by covering camera lens