PARKING ASSIST MONITOR SYSTEM, Diagnostic DTC:C1626

DTC Code DTC Name
C1626 Steering Angle Sensor Failure

DESCRIPTION

This DTC is stored if the parking assist ECU receives a signal via CAN communication from the spiral cable sub-assembly that indicates an internal malfunction.

DTC Code DTC Detection Condition Trouble Area
C1626 A fail flag is transmitted from the steering angle sensor.

  • Spiral cable sub-assembly (Steering angle sensor)

  • Parking assist ECU

INSPECTION PROCEDURE

Note


  • When "System initializing" is displayed on the display and navigation module display after the battery terminal disconnected, correct the steering angle neutral point Click here.

  • Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed Click here.

PROCEDURE


  1. REPLACE SPIRAL CABLE SUB-ASSEMBLY


    1. Replace the spiral cable sub-assembly Click here.


    NEXT

  2. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC C1626 is output (for LHD) A
      DTC C1626 is output (for RHD) B
      No DTC is output C

    B

    REPLACE PARKING ASSIST ECU Click here

    C

    END

    A

    REPLACE PARKING ASSIST ECU Click here