DESCRIPTION
This DTC is stored when the parking assist ECU cannot receive and recognize certain signals via the CAN communication system.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0101 | A problem with the shift position information signal from the power management control ECU |
|
Tech Tips
When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harness of each ECU.
INSPECTION PROCEDURE
PROCEDURE
CHECK FOR DTC (U0101)
Clear the DTCs Click here.
Check for DTCs Click here.
| Result | Proceed to |
|---|---|
| DTC U0101 is output (w/o Parking Assist Monitor System and/or Side Monitor System) | A |
| DTC U0101 is output (w/ Parking Assist Monitor System and/or Side Monitor System) | B |
| No DTC is output | C |
Tech Tips
*: CAN communication system procedure:
For LHD with Entry and Start System Click here
For LHD without Entry and Start System Click here
For RHD with Entry and Start System Click here
For RHD without Entry and Start System Click here
| B |
|
CHECK FOR DTC (C168D) Click here |
| C |
|
USE SIMULATION METHOD TO CHECK Click here |
| A |
|
GO TO CAN COMMUNICATION SYSTEM*
CHECK FOR DTC (C168D)
Clear the DTCs Click here.
Check for DTCs Click here.
| Result | Proceed to |
|---|---|
| No DTC is output | A |
| DTC C168D is output (w/ Parking Assist Monitor System and Side Monitor System) |
B |
| DTC C168D is output (w/ Rear View Monitor System and Side Monitor System) |
C |
Tech Tips
If DTC U0101 is still output after performing the procedure to troubleshoot DTC C168D, replace the parking assist ECU.
*: CAN communication system procedure:
For LHD with Entry and Start System Click here
For LHD without Entry and Start System Click here
For RHD with Entry and Start System Click here
For RHD without Entry and Start System Click here
| B |
|
GO TO PARKING ASSIST MONITOR SYSTEM Click here |
| C |
|
GO TO REAR VIEW MONITOR SYSTEM (W/ SIDE MONITOR SYSTEM) Click here |
| A |
|
GO TO CAN COMMUNICATION SYSTEM*