NAVIGATION ANTENNA INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL NAVIGATION ANTENNA ASSEMBLY


    1. A009B28

      Install the antenna with the 2 screws.

    2. Attach the 2 clamps.

  2. INSTALL DEFROSTER NOZZLE ASSEMBLY


    1. Install the defroster nozzle with the 4 screws <A>.

  3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

    Tech Tips

    Use the same procedure described for the No. 1 side defroster nozzle duct.

  4. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT


    1. Attach the 2 claws to install the No. 1 side defroster nozzle duct.

    2. Install the screw <A>.

  5. INSTALL NO. 2 HEATER TO REGISTER DUCT

    Tech Tips

    Use the same procedure described for the No. 1 heater to register duct.

  6. INSTALL NO. 1 HEATER TO REGISTER DUCT


    1. Install the No. 1 heater to register duct with the 4 screws <A>.

  7. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Install the instrument panel safety pad Click here.

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.