DISPLAY AND NAVIGATION ASSEMBLY INSTALLATION


  1. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A009884

      Attach the 6 claws to install the center instrument panel register.

  2. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 4 bolts.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 4 bolts.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  4. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY


    1. Connect the connectors.

    2. A0094FY

      Insert the display and navigation module display and attach the 8 clips on the backside of the display and navigation module display.

      Note

      When inserting the display, do not press the knobs on it.

    3. Install the display and navigation module display with the 4 bolts.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

  5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

    A0095V3

    1. Connect the connector.

    2. Attach the 4 clips to install the integration control and panel assembly.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.