DISPLAY AND NAVIGATION ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

    A00940P

    1. Detach the 4 clips.

    2. Disconnect the connector and remove the integration control and panel assembly.

  3. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY


    1. A00K1K3

      Remove the 4 bolts.

    2. A00JZ84

      Pull the display and navigation module display to detach the 8 clips on the backside of the display and navigation module display.

    3. Disconnect the connectors and remove the display and navigation module display.

  4. REMOVE NO. 1 RADIO BRACKET


    1. A00JZ9P

      Remove the 4 bolts and No. 1 radio bracket.

  5. REMOVE NO. 2 RADIO BRACKET


    1. A00JUVE

      Remove the 4 bolts and No. 2 radio bracket.

  6. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A00JYVS

      Detach the 6 claws and remove the center instrument panel register.