TOYOTA PARKING ASSIST-SENSOR SYSTEM (for 8 Sensor Type) CUSTOMIZE PARAMETERS


  1. CUSTOMIZE PARAMETERS


    1. Using Intelligent Tester

      Tech Tips

      The following items can be customized.

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Record the current settings before customizing.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the TOYOTA parking assist-sensor system on.

      4. Turn the intelligent tester on.

      5. Enter the following menus: Body / Clearance Sonar / Utility / Customize Setting.

      6. Select the setting by referring to the table below.

        Warning
        Display Default Content Setting
        Rr Sensor Onset Range Wide Set the buzzer activation range for the rear center sensors.

        Narrow or Wide


        • Narrow: 650 mm (25.59 in.)

        • Wide: 1500 mm (59.06 in.)
        Fr Sensor Onset Range Wide Set the buzzer activation range for the front center sensors.

        Narrow or Wide


        • Narrow: 500 mm (19.69 in.)

        • Wide: 1000 mm (39.37 in.)
        Keep Sense Buzzer Avail Make the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds.

        Not Avail or Avail


        • Not Avail: Not Available

        • Avail: Available
        Fr & Rr Buzzer Volume M2 Change the buzzer volume setting.

        L, M1, M2, M3 or H


        • L: Low volume

        • M1: Medium low volume

        • M2: Medium volume

        • M3: Medium high volume

        • H: High volume
        Sensor
        Display Default Content Setting
        Sensor Condition N Avail Make the front sensors available when the shift lever is in N.

        Not Avail or Avail


        • Not Avail: Not Available

        • Avail: Available
        Reverse Range Front Sensor F Stop Change the operation setting for the front sensors when the shift lever is in R.

        F, Fcrn or F Stop


        • F: Front sensors are available

        • Fcrn: Front corner sensors are available

        • F Stop: Front sensors are not available
        Non P/R Range Rear Sensor R Stop Change the operation setting for the rear sensors when the shift lever is in any position except P or R.

        R, Rcrn or R Stop


        • R: All rear sensors are available

        • Rcrn: Rear corner sensors are available

        • R Stop: All rear sensors are not available
        Display
        Display Default Content Setting
        Display Mode All Change the display mode setting (when the TOYOTA parking assist-sensor system is normal). All or Undisp

    2. On Display and Navigation Module Display or Accessory Meter

      Tech Tips

      The following items can be customized.

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Record the current settings before customizing.


      1. Turn the ignition switch to ON.

      2. Turn the TOYOTA parking assist-sensor system on.

      3. Enter the following menus: Setup / Vehicle / TOYOTA park assist.

      4. Select the setting by referring to the table below.

        Display Default Content Setting
        Alert volume 3 Change the buzzer volume setting.

        1, 2, 3, 4 or 5


        • 1: Low volume

        • 2: Medium low volume

        • 3: Medium volume

        • 4: Medium high volume

        • 5: High volume
        Display On Change the display mode setting (when the TOYOTA parking assist-sensor system is normal). On or Off
        Distance Wide Set the buzzer activation range for the rear center sensors.

        Narrow or Wide


        • Narrow: 650 mm (25.59 in.)

        • Wide: 1500 mm (59.06 in.)