HEADLIGHT ASSEMBLY (for HID Headlight) REASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL HEADLIGHT REFLECTOR LH


    1. A009AV6

      Connect the connector.

    2. Install the headlight reflector LH with the 3 screws.

      Note

      Align the cutout parts of the headlight reflector LH shaft with the cutout parts of the reflector to install the headlight reflector LH.

  2. INSTALL HEADLIGHT GASKET


    1. Install a new gasket.

  3. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH


    1. Connect the connector.

    2. Install the headlight light control ECU sub-assembly with the 4 screws.

  4. INSTALL HEADLIGHT LEVELING MOTOR LH


    1. A0097EU

      Attach the tip of the headlight leveling motor with the reflector as shown in the illustration.

    2. A0097OU

      Turn the headlight leveling motor in the direction indicated by the arrow in the illustration to install it.

      Tech Tips

      For the headlight leveling motor RH, rotate it in the opposite direction of the arrow shown in the illustration before pulling it out.

  5. INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. Install the bulb.

  6. INSTALL FRONT TURN SIGNAL LIGHT SOCKET


    1. A009BUT

      Turn the socket in the direction indicated by the arrow to install it.

  7. INSTALL CLEARANCE LIGHT BULB


    1. A0094EV

      Install the bulb.

    2. Turn the socket in the direction indicated by the arrow to install it.

  8. INSTALL NO. 2 HEADLIGHT BULB


    1. A0096MW

      Turn the bulb in the direction indicated by the arrow to install it.

  9. INSTALL DISCHARGE HEADLIGHT BULB


    1. A009BQM

      Lock the set spring as shown in the illustration to install the discharge headlight bulb.

      Note

      Do not touch the glass part of the bulb.

    2. A0096NL

      Turn the headlight control ECU socket in the direction indicated by the arrow to connect the headlight control ECU socket.

  10. INSTALL NO. 1 HEADLIGHT BACK COVER


    1. A0098XK

      Turn the back cover in the direction indicated by the arrow to install it.