NAVIGATION SYSTEM (for HDD) The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK CELLULAR PHONE


    1. Check if the other caller can hear your voice properly.

      OK
      Your voice can be heard correctly.

    NG

    CELLULAR PHONE IS FAULTY

    OK

  2. CHECK SETTINGS


    1. A00O5Y7

      Check if the mute switch is set to on.

      OK
      Mute switch is not set to on.

    NG

    TURN MUTE SWITCH OFF

    OK

  3. CHECK SETTINGS (OPERATION CHECK)


    1. A00O4TN

      Enter the "Hand-free Volume Setting" screen. Refer to "Check Hands-free Volume Setting" in Operation Check Click here.

    2. Adjust "Send Voice Level" and check that the other caller an hear your voice.

      Tech Tips


      • Adjusting "Send Voice Level" may deteriorate the sound quality.

      • The "Send Voice Level" can be set to 10 different levels, -5 to +4.

        OK
        Malfunction disappears.

    NG

    CHECK MICROPHONE (NAVIGATION CHECK MODE) Click here

    OK

    END

  4. CHECK MICROPHONE (NAVIGATION CHECK MODE)


    1. A00O4FLE03
      Text in Illustration
      *a Microphone Input Level Meter
      *b Recording Switch
      *c Stop Switch
      *d Play Switch
      *e Recording Indicator

      Enter "Microphone & Voice Recognition Check" (Check Mic & Voice Recognition) Click here.

    2. When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.

    3. Push the recording switch and perform voice recording.

      Tech Tips


      • Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.

      • Voice can be recorded for up to 5 seconds.

    4. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

      OK
      All check results are normal.

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY Click here