NAVIGATION SYSTEM (for HDD) Screen Flicker or Color Distortion

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK DISPLAY SETTING


    1. A0098E9

      Enter the display adjustment screen by pressing the "DISP" switch.

    2. Reset the display settings (contrast and brightness) and check that the screen appears normal.

      OK
      The display returns to normal.

    NG

    CHECK CABIN TEMPERATURE Click here

    OK

    END

  2. CHECK CABIN TEMPERATURE


    1. Check that the cabin temperature is higher than -20°C (-4.0°F).

      OK
      The cabin temperature is higher than -20°C (-4.0°F).

    NG

    HEAT CABIN AND RECHECK TEMPERATURE

    OK

  3. CHECK COLOR BAR


    1. A0096VD

      Enter the "Display Check" mode and select "Color Bar Check" Click here.

    2. Check that the color bars match the displayed names.

      OK
      Color bars match the displayed names.

    NG

    REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY Click here

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here