NAVIGATION SYSTEM (for DVD), Diagnostic DTC:B1569

DTC Code DTC Name
B1569 DVD-ROM Deck Disconnected

DESCRIPTION

The display and navigation module display and the navigation module board are connected by the IEEE cable.

When an IEEE communication error occurs between the display and navigation module display and the navigation module board, this DTC is stored.

DTC Code DTC Detection Condition Trouble Area
B1569

Either is met:


  • Multi-media module navigation assembly is/was not connected while the ignition switch is ON (IG or ACC).

  • Communication between the master unit and the navigation module board is not possible when the engine is started.

  • Harness or connector

  • IEEE cable

  • Display and navigation module display

  • Navigation module board

Tech Tips


  • Even if no fault is present, this DTC may be stored depending on the battery condition or engine start voltage.

  • The display and navigation module display is the master unit.

WIRING DIAGRAM

A0096RBE01

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK OPTIONAL COMPONENTS (INCLUDING ASSOCIATED WIRING)


    1. Check for optional components.


      1. Check that optional components (including associated wiring) which generate radio waves are not installed.

        Result
        Result Proceed to
        Optional components (including associated wiring) are installed A
        Optional components (including associated wiring) are not installed B

        Tech Tips


        • Electrical noise from radio waves generated by optional components or the wiring for those components may affect IEEE communication.

        • This DTC may be stored when an IEEE communication error occurs due to electrical noise.


    B

    CHECK FOR DTC Click here

    A

  2. REMOVE OPTIONAL COMPONENTS (INCLUDING ASSOCIATED WIRING)


    1. Remove the optional components (including associated wiring).

      Note

      Do not remove the optional components or associated wiring without the permission of the customer.


    NEXT

  3. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs and check if the same trouble occurs again.

      OK
      No DTCs are output.

    NG

    CHECK HARNESS AND CONNECTOR (NAVIGATION MODULE BOARD POWER SOURCE) Click here

    OK

    END

  4. CHECK HARNESS AND CONNECTOR (NAVIGATION MODULE BOARD POWER SOURCE)


    1. A0097VIE01
      Text in Illustration
      *a

      Front view of wire harness connector

      (to Navigation Module Board)

      Disconnect the H16 navigation module board connector.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      H16-5 (G) - Body ground Always Below 1 Ω

    3. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      H16-1 (+B) - H16-5 (G) Always 11 to 14 V
      H16-3 (ACC) - H16-5 (G) Ignition switch ACC 11 to 14 V

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR

    OK

  5. CHECK IEEE CABLE CONNECTOR


    1. Check the IEEE cable connector.


      1. Check if the IEEE cable connectors between the navigation module board and the display and navigation module display have any connection problems Click here.

    2. Check that the screen display is normal.

      OK
      Screen display is normal.

    NG

    REPLACE IEEE CABLE Click here

    OK

    END

  6. REPLACE IEEE CABLE


    1. Replace the IEEE cable between the navigation module board and the display and navigation module display.

    2. Check that the screen display is normal.

      OK
      Screen display is normal.

    NG

    REPLACE NAVIGATION MODULE BOARD Click here

    OK

    END

  7. REPLACE NAVIGATION MODULE BOARD


    1. Replace the navigation module board Click here.

    2. Clear the DTCs Click here.

    3. Check for DTCs and check if the same trouble occurs again.

      OK
      No DTCs are output.

    NG

    REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY Click here

    OK

    END