MULTI-MEDIA INTERFACE ECU INSTALLATION


  1. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET


    1. Install the No. 1 multi-media interface bracket with the bolt.

  2. INSTALL NO. 2 MULTI-MEDIA INTERFACE BRACKET


    1. Install the No. 2 multi-media interface bracket with the bolt.

  3. INSTALL MULTI-MEDIA INTERFACE ECU


    1. Install the multi-media interface ECU with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect the 3 connectors.

  4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    A00O698E01
    Text in Illustration
    *1 Bolt
    *2 Screw

    1. Connect each connector.

    2. Attach the 5 clips and claw to install the glove compartment door.

    3. Install the 2 bolts <C> and 2 screws <A> or <B>.

  5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Attach the 3 clips and 2 guides to install the No. 2 instrument panel under cover.

    2. Install the screw.

      A00OAYQE01
      Text in Illustration
      *A for LHD *B for RHD

  6. INSTALL INSTRUMENT PANEL ORNAMENT


    1. Attach the 5 clips to install the instrument panel ornament.

  7. INSTALL INSTRUMENT SIDE PANEL RH


    1. Connect the connector.

    2. Attach the 5 clips, claw and 3 guides to install the instrument side panel.

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.