STEREO JACK ADAPTER ASSEMBLY (for Bench Seat Type) INSTALLATION


  1. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY


    1. Attach the 2 claws to install the No. 1 stereo jack adapter assembly.

  2. INSTALL UPPER CONSOLE PANEL


    1. Connect the connectors and attach the 2 clamps.

    2. Attach the 2 clips to install the upper console panel.

    3. Install the 2 screws.

  3. INSTALL FRONT CONSOLE UPPER PANEL GARNISH


    1. Connect the connectors.

    2. Attach the 5 clips to install the front console upper panel garnish.

  4. INSTALL INSTRUMENT PANEL FINISH PANEL END RH


    1. Connect the connector.

    2. Attach the 4 clips to install the instrument panel finish panel end.

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. Attach the 4 clips to install the instrument panel finish panel end.

  6. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  7. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. Attach the 5 clips to install the No. 2 instrument panel finish panel cushion.

  8. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

    A0095V3

    1. Connect the connector.

    2. Attach the 4 clips to install the integration control and panel assembly.

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.