RADIO ANTENNA CORD INSTALLATION


  1. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for 5 Door)


    1. w/o Sliding Roof:

      Tech Tips

      The part of the antenna cord shown in the part of the illustration labeled A only exists for vehicles with antenna diversity.


      1. Apply new double-sided tape as shown in the illustration.

        Tech Tips

        Attach double-sided tape to the hatched areas shown in the illustration below.

        A00JX00E01
        Text in Illustration
        A00JZ60 Marking Tape A00JWHT Double-sided Tape

      2. Attach the clamp in the part of the illustration labeled 1.

      3. Align the antenna cord with the marking in the part of the illustration labeled 2 and attach it to the double-sided tape.

      4. Align the antenna cord with the marking in the part of the illustration labeled 3 and attach it to the double-sided tape.

      5. Align the marking tape on the antenna cord with the V mark on the roof headlining in the part of the illustration labeled 4.

      6. Align the antenna cord with the marking in the part of the illustration labeled 5 and attach it to the double-sided tape.

      7. Align the marking tape on the antenna cord with the V mark on the roof headlining in the part of the illustration labeled 6.

      8. While gathering the slack in the antenna cord in the part of the illustration labeled 7, align the antenna cord with the marking and attach it to the double-sided tape.

      9. Attach the clamps in the parts of the illustration labeled 8 and 9.

      10. Align the antenna cord with the marking in the part of the illustration labeled 10 and attach it to the double-sided tape.

      11. Attach the antenna cord to the notches in the roof headlining in the parts of the illustration labeled 9 and 11.

    2. w/ Sliding Roof:

      Tech Tips

      The part of the antenna cord shown in the part of the illustration labeled A only exists for vehicles with antenna diversity.


      1. Apply new double-sided tape as shown in the illustration.

        Tech Tips

        Attach double-sided tape to the hatched areas shown in the illustration below.

        A00JXFUE01
        Text in Illustration
        A00JZ60 Marking Tape A00JWHT Double-sided Tape

      2. Attach the clamp in the part of the illustration labeled 1.

      3. Align the antenna cord with the marking in the part of the illustration labeled 2 and attach it to the double-sided tape.

      4. Align the marking tape on the antenna cord with the V mark on the roof headlining in the part of the illustration labeled 4.

      5. Align the antenna cord with the marking in the part of the illustration labeled 4 and attach it to the double-sided tape.

      6. Attach the 5 clamps in the part of the illustration labeled 5.

      7. Align the marking tape on the antenna cord with the V mark on the roof headlining in the part of the illustration labeled 6.

      8. While gathering the slack in the antenna cord in the part of the illustration labeled 7, align the antenna cord with the marking and attach it to the double-sided tape.

      9. Align the antenna cord with the marking in the part of the illustration labeled 8 and attach it to the double-sided tape.

      10. Attach the clamps in the parts of the illustration labeled 9 and 10.

      11. Align the antenna cord with the marking in the part of the illustration labeled 11 and attach it to the double-sided tape.

      12. Attach the antenna cord to the notches in the roof headlining in the parts of the illustration labeled 10 and 12.

  2. INSTALL ROOF HEADLINING ASSEMBLY (for 5 Door)


    1. Install the roof headlining Click here.

  3. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (for 3 Door)


    1. w/o Sliding Roof:

      Tech Tips

      The part of the antenna cord shown in the part of the illustration labeled A only exists for vehicles with antenna diversity.


      1. Apply new double-sided tape as shown in the illustration.

        Tech Tips

        Attach double-sided tape to the hatched areas shown in the illustration below.

        A00K1N9E01
        Text in Illustration
        A00JZ60 Marking Tape A00JWHT Double-sided Tape

      2. Attach the clamp in the part of the illustration labeled 1.

      3. Align the antenna cord with the marking in the part of the illustration labeled 2 and attach it to the double-sided tape.

      4. Align the marking tape on the antenna cord with the V marks on the front and rear of the roof headlining, and then align the antenna cord with the marking in the part of the illustration labeled 3 and attach it to the double-sided tape.

      5. Attach the clamps in the parts of the illustration labeled 4 and 5.

      6. Align the antenna cord with the marking in the part of the illustration labeled 6 and attach it to the double-sided tape.

      7. Attach the antenna cord to the notches in the roof headlining in the parts of the illustration labeled 5 and 7.

    2. w/ Sliding Roof:

      Tech Tips

      The part of the antenna cord shown in the part of the illustration labeled A only exists for vehicles with antenna diversity.


      1. Apply new double-sided tape as shown in the illustration.

        Tech Tips

        Attach double-sided tape to the hatched areas shown in the illustration below.

        A00JZVKE01
        Text in Illustration
        A00JZ60 Marking Tape A00JWHT Double-sided Tape

      2. Attach the clamp in the part of the illustration labeled 1.

      3. Align the antenna cord with the marking in the part of the illustration labeled 2 and attach it to the double-sided tape.

      4. Align the marking tape on the antenna cord with the V marks on the front and middle of the roof headlining.

      5. Attach the clamps in the part of the illustration labeled 3.

      6. Attach the clamp in the part of the illustration labeled 4.

      7. Align the antenna cord with the marking in the part of the illustration labeled 5 and attach it to the double-sided tape.

      8. Align the marking tape on the antenna cord with the V mark on the roof headlining in the part of the illustration labeled 6.

      9. While gathering the slack in the antenna cord in the part of the illustration labeled 7, align the antenna cord with the marking and attach it to the double-sided tape.

      10. Attach the clamps in the parts of the illustration labeled 8 and 9.

      11. Align the antenna cord with the marking in the part of the illustration labeled 10 and attach it to the double-sided tape.

      12. Attach the antenna cord to the notches in the roof headlining in the parts of the illustration labeled 9 and 11.

  4. INSTALL ROOF HEADLINING ASSEMBLY (for 3 Door)


    1. Install the roof headlining Click here.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.